Editing, Storing And Copying User Presets - DigiTech VOCALIST LIVE 4 Owner's Manual

Using the Vocalist
In addition to creating vocal harmonies, the Vocalist Live 4 also offers a wide variety of effects
you can apply to your voice. You can quickly change the harmonies and effects by changing
presets. Each preset has a name and a number, as well as a set of harmonies and/or other effects
assigned to it.
• You can cycle through all the different presets by pressing the Up/Down Footswitches,
located on the lower right side of the Vocalist Live 4.
• You can turn a preset's harmonies on or off with the Harmony Footswitch.
You can turn a preset's effects on or off with the Effects Footswitch.
•
There are two kinds of presets: User and Factory. You can change User presets (numbers -
50), but you can't change Factory presets (numbers 5-00). When the Vocalist Live 4 ships from
the factory, the User and Factory presets are identical
Use the Effects Matrix, Edit Up/Down buttons, and Parameter knobs to edit User presets.

Editing, Storing and Copying User Presets

To edit a User preset
Select a User preset with the Up/Down footswitches. User presets are numbered -50.
.
2. Press one of the Edit Up/Down buttons to select a row in the Effects Matrix. Each row
controls one effect, named in the leftmost column. When a row is selected, the display
briefly shows each of its five parameters.
3. Turn a Parameter knob to change the parameter listed below it in the selected Effects
Matrix row. The parameter's name and value appear in the Alphanumeric display when you
turn its Parameter knob. Repeat this step for each parameter you want to change.
4. Repeat steps 2 and 3 for each effect you want to edit.
To store your changes to a User preset
Warning: Do not disconnect the power from the Vocalist Live 4 when storing a preset
(when the Alphanumeric display reads Storing... .) Doing so may erase your user
presets. In the event that this happens, perform a Factory Reset, described on page 24.
. Press the Store button. The Alphanumeric display briefly reads Store to, then the
currently selected preset name and number appear. The first letter in the preset's name
flashes.
2. Press the Store button again to store the preset to the current preset number (or press
any button other than Store or Key Up/Down to cancel).
To copy a User preset to a different preset number
. Select a User preset with the Up/Down Footswitches (presets -50).
2. Press the Store button. The Alphanumeric display reads Store to.
3. Turn the leftmost Parameter knob to select a User preset number (-50).
4. Press the Store button again to complete the copy procedure (or press any button other
than Store or Key Up/Down to cancel).
To rename a User preset
Select a User preset with the Up/Down Footswitches (presets -50).
.
2. Press the Store button. The Alphanumeric display reads Store to.
3. Turn the second-from-left Parameter knob to select a letter in the Alphanumeric display (or
use the Key Up/Down buttons). The selected letter flashes.
4. Turn the third-from-left Parameter knob to change the selected letter.
5. Press the Store button again (or press any button other than Store to cancel).
Live 4
®