Receive Hold Key Scan Code; (H); Respond Key Accepted - 56 - DigiTech SDISC SYSEX1.25 Manual

Procedures
Procedures
RECEIVE HOLD KEY SCAN CODE (55h)
SYS_HEAD, 55
cc
xx
The Receive Hold Key Scan Code procedure is used to emulate a button press and hold
on the front panel of a DigiTech Device. The device will respond with a Receive Key
Accepted procedure. See the Key Scan Code Maps (page 18) for a list of Key Scan
codes.
RESPOND KEY ACCEPTED (56h)
SYS_HEAD, 56
cc
The Respond Key Accepted procedure is sent from the DigiTech device in response and
acceptance of a Receive Scan Code Key or Receive Hold Scan Code Key procedure
but is ignored if received by a DigiTech device.
14
14
, cc, xx, F7

(h)

(h)
Code for the Key Scan.
Time the key is pressed expressed in 0.1 second increments.
, cc, F7
(h) (h)
Code echoed for the Key Scan received. (00 if key is invalid)
(h)
DigiTech S-DISC™ SysEx
DigiTech S-DISC™ SysEx