Chorus/Fx; Chorus - DigiTech RP255 Owner's Manual

range from 0 (opens easily/high sensitivity) to 99 (requiring strong signals to open/high sen-
sitivity).
Attack Time - Knob 3 sets the attack time. Ranges from 0 (shorter attack time) to 99
(longer attack time).
Release - Knob 4 sets the Release parameter. Ranges from 0 to 99.
Attenuation (X-Edit

Chorus/FX

The Chorus/FX row in the RP255 is a multi-function module, allowing you to select Effect models
such as Chorus, Flanger, Phaser, Tremolo, Panner, Vibrato, Rotary Speaker, YaYa™, AutoYa™,
SynthTalk™, Envelope Filter (auto wah), Detune, Pitch Shift, and Whammy™ effects. When the
Chorus/FX row is selected, Knob 1 is used to choose the Effect model. Press this knob to turn
these Effect models on and off. Only one of the effects in this row can be used at a time. After
selecting the type of effect in this module, Knobs 2-4 can then be used to adjust the individual
parameters associated with the selected effect. The following list describes each Effect model and
its parameters in more detail:

Chorus

A Chorus adds a short delay to your signal. The delayed signal is modulated in and out of tune
and then mixed back with the original signal to create a thicker sound. The RP255 includes the
following Chorus Effect models: Ce CHS (based on the classic Boss
(DigiTech 's Dual Chorus), and MCHOrS (DigiTech's famous Multi Chorus
®
Speed - Knob 2 adjusts the rate (Speed) of the modulation. Ranges from 0 to 99.
Depth - Knob 3 adjusts the Depth of the modulation. Ranges from 0 to 99.
Level - Knob 4 controls the level of the effect (DigiTech Chorus models only). Ranges
from 0 to 99.
only) - Sets the Attenuation parameter. Ranges from 0 to 99.
TM
CE-2 Chorus), CHOruS
®
).
®
27