Brickhouse Security Livewire 4 Wiring Manual

BrickHouseSecurity.com
Pin Layout From Device
1 2 3 4 5 6 7
Basic Installation
Just three wires are needed for this installation.
Livewire 4
Pin Wire Color Connection
7 Black Run to Ground
4 White Run to Iginition
3 Red Run to 12v Power
Wiring Guide
Wiring Key
Pin Wire Color
7 Black
6 Green
5 Yellow
4 White
3 Red
2 Gray
1 Orange
Advanced Installation
STOP - Advanced installation not required for regular
GPS tracking. Please contact us before attempting any
custom installations.
Pin Wire Color Connection
7 Black Run to Ground
6 Green Output 2
5 Yellow Output 1/Input
4 White Run to Ignition (Connect to Run Part)
3 Red Run to 12v Power
2 Gray TXD
1 Orange RXD
Notes on TXD and RXD (Advanced Installation)
TXD signal is an output on a DTE device and an input on a DCE
device. Similarly, RXD is an output on a DCE device and input on
a DTE device.
Livewire 4
Discription
Ground
Output 2
Output 1/Input
Ignition Detection
12v Power Input
TXD
RXD
Livewire 4