Brickhouse Security Spark Nano 6 Quick Start Manual

www.BrickHouseSecurity.com
2 | Power
Disconnect the Spark Nano from the power source.
Press and hold the Power button for 3 seconds to turn
on the unit.
4 | Log In
Using a web browser visit brickhousesecurity.com/
gps-login OR open the BrickHouse TrackView App on
your mobile device.
Check your email account for an email with the subject
"Important: Your Password for GPS Login"
to find your login information.
Spark Nano 6
Quick Start Guide
1 | Charging
Connect the included USB to a power source
and charge the Spark Nano for 6 hours.
Only use the included USB cable. Use of unauthorized
cables may damage the device!
3 | Test Drive
Take the Spark Nano for a 20-30 minute test drive
so that it may establish a GPS connection.
During the drive, keep the unit on your front dashboard
facing upwards towards the sky.
5 | View Tracking
Once you login you will be able to see the tracking
reports from your test drive.
You are now ready to begin tracking!
Get the most out of your BrickHouse Security GPS
tracker by customizing your account with
GeoFences and Alerts.