Section One - Introduction; Getting Acquainted; Included Items; Quick Start - DigiTech RP 2000 User Manual

Section One - Introduction

Section-1 Introduction

Getting Acquainted

Congratulations on your wise choice in purchasing the RP2000.Thanks to the continuous advances in musical
technology, you have the flexibility, power, and capability of producing sonic creations never before thought
possible. Although the RP2000 is so user friendly you may not even need to read this manual, we
recommend that you become better acquainted with us, and what we have to offer by going through this
User's Guide with your RP2000 in front of you. It is your key to unlocking the potential within the RP2000.

Included Items

Before you get started, please make sure that the following items have been included:
• RP2000
• PS0920 Power Supply
• User's Guide
• Warranty Card
The utmost care was taken while your RP2000 was being manufactured, so everything should be included and
in perfect working order. If anything is missing, contact the factory at once. Please help us become acquainted
with you and your needs by completing your warranty card. It is your safeguard should a problem arise with
your RP2000.

Quick Start

This brief overview of the RP2000 and it's functions is included for those of you looking for immediate
gratification.
Making Connections:
Connect your instrument to the input jack on the rear panel. Connect the Left or Right Outputs to the
input(s) of your amplifier(s) or power amp.To select the output mode, press the Utility button once and
rotate the Data Wheel to select either Stereo or Mono output mode.
Apply Power:
Turn the Output knob on the rear panel of the RP2000 all the way down (fully counter clockwise). Connect
the plug of the PS0920 power supply to the power jack on the RP2000. Connect the other end of the
PS0920 power supply to an AC outlet.Turn the power of your amplifier(s) to the on position and adjust the
volume(s)to a normal playing level. Gradually increase the RP2000 Output knob to achieve the desired
volume.
Select Preset:
The RP2000 comes with 64 pre-Programmed factory Presets, and 64 user Presets. From the factory, the user
Presets are exact duplicates of the factory Presets.This allows you to experiment without running the risk of
losing any of the original sounds contained in the RP2000.
Use the 1-4 Footswitches or the Data Wheel to select different Presets. Once you have found Presets that
suit your taste, you can alter the sounds to your specific needs. By pressing the Edit button and then using
the Matrix buttons, you can access any of the effects contained within the selected Preset. Successive presses
of the Matrix buttons will advance through each of the parameters related to each effect. Use the LED
Matrix to choose the parameter you wish to edit. Follow the rows and columns to the point where the
vertical and horizontal LEDs intersect.This will indicate the parameter you have selected. Once a parameter
has been selected, you may increase or decrease the parameter value to your liking by rotating the Data
Wheel. Remember that you are not at risk of losing any sounds so, don't be afraid to experiment.
RP2000 User's Guide