curt 13251 Manual

13251
2/3/2011
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
Parts List
ITEM QTY PART NUMBER
1 4 1_2 - 13 x 4 HEX BOLT
2 4 1/2" CONICAL TOOTHED WASHER
TOOLS REQUIRED
RACHET
3/4" SOCKET
SCREWDRIVER
HITCH WEIGHT: 17 LBS.
INSTALL TIME
30
PROFESSIONAL: MINUTES
60
NOVICE (DIY): MINUTES
INSTALL NOTES:
NO DRILLING REQUIRED
INSTALLATION STEPS
1) Lower spare tire to allow access to the rear bumper support.
2) Remove tow hook (if present) and return to vehicle owner.
3) Remove (4) large and (2) small plastic push fasteners from bumper fascia tabs. (Reuse later)
4) Pull bumper cover away from vehicle and raise hitch into position. Secure hitch with hex bolts and conical
washers through existing holes in bumper support.
5) Torque all 1/2" fasteners to 75 lb-ft.
6) Reinstall plastic push fasteners removed in step 2.
7) Raise spare tire back into position.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
78251 / 3815AT / RRH13251
JEEP GRAND CHEROKEE
DESCRIPTION
5000 LBS. TRAILER WEIGHT &
5500 LBS. TRAILER WEIGHT &
1-800-798-0813
1
2
500 LBS. TONGUE WEIGHT.
550 LBS. TONGUE WEIGHT