Walthers LIFE-LIKE PRODUCTS KENTUCKY FRIED CHICKEN 433-1394 Assembly Instructions

KENTUCKY FRIED CHICKEN
BEFORE YOU BEGIN, READ INSTRUCTIONS CAREFULLY!
Read each step thoroughly before attempting to complete it. Study the diagrams and locate
where various parts will be needed. The part numbers are indicated on the sprues. (Sprues are
the rods to which the parts are connected.)
If you want to customize your building with paint, determine which parts will need to be painted
BEFORE assembly. Find the parts on the sprues, and decide whether it will be easier to paint
them on or off the sprue. If the parts can best be painted off the sprue, remove them carefully
with a hobby knife and make a note of the part number so you can identify the part when
assembling it.
Use watery styrene cement, applied sparingly, to assemble this building. Use sandpaper or a
file to roughen a surface that is resisting the cement. Make sure the parts fit correctly BEFORE
you apply cement!
1 • interior detail
1. Cement the REAR DOOR (18) to the REAR WALL (19). (Fig. 1)
2. Cement the CASH REGISTER (11) to the SERVICE COUNTER (12). Now
peel off and stick the COUNTER LABEL and the COKE LABEL to the
service ounter as shown in (Fig. 2).
3. Peel off and stick the MENU LABEL to the COUNTER WALL (13). (Fig. 3)
4. Match up the numbers on the INNER (1-6) and OUTER BRICK WALLS
(A1-A6). Holding each pair of walls together, cement the tabs on the
bottom into the matching slots in the BASE. Now cement the brick walls to
each other, making sure that they match and fit properly in the corners.
(Fig.4)
5. Carefully insert the LEFT WINDOW (43), FRONT WINDOW (43) and
RIGHT WINDOW (42) between the brick walls, with the raised black ribs
facing outward. Cement the HANDRAIL (14) to the BASE. (Fig. 5)
fig. 4
Item No. 433-1394
ASSEMBLY INSTRUCTIONS
fig. 5
fig. 1
fig. 2
fig. 3
®