Walthers CORNERSTONE WALTON & SONS LUMBER 933-3057 Manual

Thanks for purchasing this Cornerstone Series Kit. Please read all instructions before starting. All parts are molded in
styrene plastic. Use glues and paints which are compatible.
The local lumberyard became a fixture in cities and towns wherever the tracks ran. To keep the lumber dry and reduce
warping or swelling, it was stored under cover, in large sheds built especially for the purpose. When standardized material
sizes were adopted, this also allowed for easy sorting.
Today, the small lumberyard has evolved into the building materials center. Railroads still carry much of the bulk lumber
shipments, which are usually sent to regional distribution centers, then reloaded on trucks. Carrying everything from studs
to kitchen cabinets, some also fabricate components, such as wall sections or roof trusses for local contractors.
For more ideas to detail your scene, ask your dealer, visit our Web-site waltherscornerstone.com or see the latest Walthers
HO Scale Model Railroad Reference Book.
30
31
28
23
SEPARATE SHEDS
7
11
6
2
© 2012 Wm. K. Walthers, Inc., Milwaukee, WI 53218 waltherscornerstone.com I-933-3057
21
28
29
25
24
23
NOTE: Before proceeding, decide on which version of the shed you wish to model. Then,
follow the appropriate instructions.
A. First, cut off the top section of part #8, just above the "V" bracing. After gluing the walls
(2, 4, 6) to the base (1), place (do not glue) the horizontal bracing (11) on the base. Now,
glue the vertical bracing (7, 8) in place on the base, making sure that they go in front of the
crosswise braces of part #11. The end most vertical posts rest on top of the "lip" on the
CUT
8
14
4
10
1
HO Structure Kit
WALTON & SONS LUMBER
933-3057
33 X2
34
27
26
25
24
33
15
3
9 X8
1. Start by gluing windows (29) and
doors (28) in their respective places
on the walls (23, 24, 25). Next, glue
the window "glass" (21,30,31) in
place. Glue the four walls (23, 24,
25, 26) together and to the base
(33). Make sure the steps line up
with the doors. Then, glue the roof
(27) on and finish by gluing the
chimney (33, 34) together and in
place on the roof.
base and the remaining
posts go into the square
holes so that they are even
with the bottom of the
base. Next, slide part #11
10
up and glue to the bottom
of the first crosswise brace
on parts # 7 and 8 and on
top of the tabs on the back
12 wall. Glue the ladders (10)
and railing (12) in place.
Then, glue the wall exten-
sions (3, 5) to the top of
the side walls (2, 4). Glue
5
the roof pieces (14, 15) in
position and complete by
gluing the
braces (9) in place on part
#8 and under roof #15.
Repeat procedure
second shed.
overhang
for