AT&T CLP99287 Quick Start Manual

CLP99287/CLP99387/
This quick start guide provides you
CLP99457/CLP99487/
with basic instructions only. For
CLP99547/CLP99557/
CLP99587 more complete instructions, refer
to your user's manual provided in
the package, or download it at
www.telephones.att.com/manuals.
Quick start guide
Part lists
Ì
Ì
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH) Ì
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine CR1535
Ì
CLP99287/CLP99387/
CLP99457/CLP99487/
CLP99547/CLP99557/
CLP99587
Quick start guide
Ì
1 for CLP99287
Ì
2 for CLP99387
Ì
3 for CLP99457/
CLP99487
Ì
4 for CLP99547/
CLP99557/
CLP99587
Install
Telephone base
Notes:
Plug one end of the telephone line cord into a telephone jack or a DSL
f f
filter.
If you have DSL high-speed Internet service, a DSL filter (not included)
f f
is required.
Charger
Caution: Use only the supplied rechargeable battery or replacement
battery (model BT183342/BT283342).
Caution: Use only the power adapter(s) provided with this product.
To obtain a replacement, visit our website at
www.telephones.att.com 1 (800) 222-3111
or call . In
1 (866) 288-4268
Canada, dial .
Battery
Install the battery, as shown below. Charge your handset(s)
before initial use. The battery is fully charged after 11 hours
of continuous charging.
2 for CLP99287
3 for CLP99387
4 for CLP99457/
CLP99487
5 for CLP99547/
CLP99557/
Handset
CLP99587
CHARGE light
PUSH TO TALK
User's manual
CLP99287/CLP99387/CLP99457/
CLP99487/CLP99547/CLP99557/
CLP99587
DECT 6.0 cordless telephone/
answering system with
BLUETOOTH® wireless technology
VOICE
Softkeys (2)
Handset
Ì Press to make or answer a cell call.
CELL 1/
Ì
During a cell call, press to answer
CELL 2
an incoming CELL 1/2 call when you
hear a call waiting alert.
Ì
Press to make or answer a home
HOME/
call.
FLASH
Ì During a call, press to answer an
incoming home call when you
receive a call waiting alert.
Ì
During a call, press to hang up.
Ì
While in a menu, press to cancel an
operation, back up to the previous
menu, or exit the menu display; or
press and hold this button to exit
to idle mode.
Ì
When the handset is ringing, press
to mute the ringer temporarily.
Ì Press and hold while the telephone
is not in use to erase the missed
call indicator.
Ì
DIR Press DIR to show directory entries
when the handset is not in use.
Ì
Press to scroll up or down while in
menus.
Ì Press to increase or decrease the
listening volume when on a call.
Ì
While entering names or numbers,
press to move the cursor to the left
or right.
CID Ì Press CID to show caller ID log
when the handset is not in use.
Ì Press and hold to set or dial your
1
voicemail number.
/ Ì
Press to switch to tone dialing
TONE a>A
Overview temporarily during a call if you
have pulse service.
Ì
While entering names, press to
change the next letter to upper or
lower case.
# Ì
QUIET/ Press and hold to enter the
QUIET mode setting screen, or to
deactivate QUIET mode.
Ì
Press to make or answer a home or
cell call using the speakerphone.
MUTE/DELETE Ì
During a call, press to mute the
microphone.
Ì
While entering numbers or names,
press to delete a digit or character.
Ì
While reviewing caller ID log,
directory, redial memory, allow list,
block list, or star name list, press to
delete an individual entry.
Ì
REDIAL/PAUSE Press repeatedly to view the last
ten numbers dialed.
Ì
While entering numbers, press and
hold to insert a dialing pause.
Ì
On when the handset is charging in
the telephone base or charger.
Ì
Press to initiate a one-to-one or
one-to-group broadcast.
Ì
Press and hold to broadcast to a
group of system devices.
Ì
Press to activate the
voice-controlled application of
connected cell phone.
Ì
Press to select the menu item
displayed above the key.
Ì While in a menu, press to select
an item, save an entry or setting,
cancel an operation, or back up to
the previous menu.
Telephone base
Ì Press to scroll down while in a
CALLER ID
menu.
Ì
Press to show caller ID log
when the telephone base is
not in use.
Ì
USB port The standard size USB port in
the telephone base is used for
charging your cell phones.
Ì
Press to turn the built-in
/ ANSWER ON
answering system on or off.
Ì
X/DELETE During a call, press to mute the
microphone.
Ì
While entering numbers or
names, press to delete a digit
or character.
Ì Press to delete the message
currently playing.
Ì
Press twice to delete all
previously reviewed messages
when the telephone is not in
use.
Ì
/ REPEAT During message playback,
press to repeat a message
Telephone base
or press twice to play the
previous message.
Ì
MIC Microphone.
Ì During message playback,
/ SKIP
Ì While the phone is idle, press
press to skip a
/ HANDSET
to page all handsets.
LOCATOR Ì
Press to start or stop message
/PLAY/STOP
playback.
MUTE Ì During a call, press to mute the
microphone. Ì
CELL 1/CELL 2 Press to make or answer a cell
Ì While the telephone base is call.
ringing, press to silence the
Ì
HOME Press to make or answer a
ringer temporarily.
(Speakerphone) home call.
Ì
While in idle mode, press to
VOLUME
adjust the base ringer volume.
1 Ì Press and hold to set or dial
Ì
During message playback, your voicemail number.
press to adjust the listening
/ Ì
Press to switch to tone dialing
TONE a>A
volume.
temporarily during a call if you
Ì have pulse service.
VOICE Press to activate the
voice-controlled application of Ì
While entering names, press
connected cell phone. to change the next letter to
upper or lower case.
Ì
PTT/FLASH Press to display the PTT menu
# Ì
to begin a PTT call. QUIET/ Press and hold to enter the
QUIET mode setting screen, or
Ì
Press and hold to begin a one-
to deactivate QUIET mode.
to-group broadcast when the
telephone base is not in use.
Ì
During a call, press to answer
an incoming home call when Basic initial settings
you receive a call waiting alert.
Ì
Softkeys (2) Press to select the menu item
displayed above the key. We recommend you program your telephone system
before use. The following are a few examples of common
Ì
While in a menu, press to
features to set before using the telephone. Refer to the
select an item, save an entry or
Handset and telephone base settings and Answering
setting, cancel an operation, or
system settings in the Complete user's manual for detailed
back up to the previous menu.
instructions on setting all telephone features.
Ì
CANCEL While in a menu, press to exit
Date and time
without making changes or
press and hold to return to idle
mode.
Note: Set the date/time before using the answering system.
Ì
Press and hold while the
Using a cordless handset or the telephone base:
telephone is not in use to erase
the missed call indicator. 1. MENU -> / -> Set date/time -> SELECT.
2. Enter the month (MM), day (DD) and year (YY) -> NEXT.
REDIAL/PAUSE Ì Press repeatedly to view the
last ten numbers dialed. 3. Enter the hour (HH) and minute (MM).
Ì While entering numbers, press / -> AM or PM -> SAVE.
4.
and hold to insert a dialing
pause.
Basic answering system setup via
Ì
Press to scroll up while in a voice guide
DIRECTORY
menu.
You can follow the voice guide to record your own
Ì
Press to show directory entries
announcement, set the number of rings and set the
when the telephone base is
message alert tone.
not in use.
Using a cordless handset or the telephone base:
1. MENU -> / -> Answering sys -> SELECT.
2. / -> Voice guide -> SELECT.
3. Set up the answering system by inputting the designated
numbers, as instructed.
Add a Bluetooth cell phone/headset
®
To use a Bluetooth enabled cellular phone or headset
with your telephone, you must first pair and connect your
Bluetooth cellular phone or headset with the telephone
base.
Bluetooth wireless technology operates within a short range
(up to 30 feet). Keep the connected device within 15 feet of
the telephone base for optimal performance.
To pair and connect a cell phone using the telephone
base:
1. MENU -> / -> Bluetooth -> SELECT.
2. SELECT to select Add device.
SELECT to select Add cellular.
3.
4. Disconnect the cell phone from any Bluetooth device ->
Press NEXT.
5. Place the cell phone next to the telephone base.
6. Press NEXT to turn on the telephone base discoverable
mode.
7. Turn on the Bluetooth feature of your cell phone and
search for or add new advices. Once your cell phone finds
your AT&T phone (AT&T DECT 6.0), press the appropriate
key on your cell phone to continue the pairing process.
message.
Enter the cell phone passcode (typically 0000), if
f f
required ->Press SET.
Enter the PIN (default PIN: 0000) of the telephone
f f
base into your cell phone, if required.
To pair and connect a headset using the telephone base:
1. MENU -> / -> Bluetooth -> SELECT.
2. SELECT to select Add device.
3. / -> Add headset -> SELECT.
4. Disconnect your headset from any Bluetooth device ->
Press NEXT.
5. Set your headset to discoverable mode -> Press NEXT.
6. Press / to choose your headset, if required -> Press
SELECT.
Enter the PIN (typically 0000) of your headset, if
f f
required -> Press NEXT.
Record your own announcement
Your outgoing announcement plays when calls are
answered by the answering system. You can use the preset
announcement to answer calls, or replace it with your own
recorded announcement.
Using a cordless handset or the telephone base:
MENU -> Answering sys -> SELECT.
1. -> /
2. SELECT to select Announcement.
SELECT to select Record annc.
3.
4. Speak towards the handset or the telephone base to
STOP
record your announcement and press to end
recording and save it.
Number of rings
You can set the answering system to answer an incoming
call after 2, 3, 4, 5, or 6 rings. You can also select toll saver. If
you choose toll saver, the answering system answers a call
after two rings when you have new messages, or after four
rings when there are no new messages. This enables you to
check for new messages and avoid paying unnecessary long
distance charges if you are calling from out of your local
area.
Using a cordless handset or the telephone base:
1. MENU -> / -> Answering sys -> SELECT.
2. / -> Ans sys setup -> SELECT.
3. / -> # of rings -> SELECT.
4. / to choose among 2, 3, 4, 5, 6, or Toll saver ->
SELECT.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use
of such marks by Advanced American Telephones and its parent, VTech Holdings
Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.