TC-Helicon DUPLICATOR Quick Start Manual

Quick Start Guide
TC HELICON DUPLICATOR
Doubling - Selects the type and amount
of doubling e ect on your voice.
Reverb - Selects the type and amount
of reverb e ect.
USB – Accepts micro-USB cables for
rmware updates.
On/O
Visit tc-helicon.com to download the full manual
Correction - Adjusts the amount of
pitch correction.
Tone – Engages 'Adaptive Tone'
for EQ, compression, de-essing
and gating.
Footswitch – Bypass the doubling
e ect with a single press. Holding for
a few seconds bypasses doubling and
reverb e ects.
Out – Connect to a mixer or
powered speaker.
Mic – Connect your microphone.
Power – Connect a 9V / >300 mA
power supply, such as the PowerPlug 9
(not included). The pedal also accepts
4 x AA batteries.