ClosetMaid 8282 Instructions

CORNER SHELF INSTRUCTIONS
HARDWARE PROVIDED HARDWARE REQUIRED
#2 Phillips 1/4 in. Drill Bit Drill
x4 x4
Place unit in desired location and mark the locations of the holes on the wall. Remove shelf, drill 1/4" holes at the
marked locations, and insert the four wall anchors. Place unit back into position and use a #2 Phillips screwdriver to
secure the four #8 x 1 in. pan head screws through the shelf into the wall anchors.
8282 01/21 © 2021 The AMES Companies, Inc. | Orlando, FL 32827 | 1-800-874-0008 | www.closetmaid.com