Fluance RT81T Connection Manual

Turntable Connection Guide
Turntable + Preamp + Turntable + Preamp +
Amplifier + Passive Speakers Powered Speakers
GND RCA
GND RCA
Preamp*
Preamp*
GND**
Amplifier (required)
Speaker Wire
Speaker Wire
*Some Turntables (RT80/RT81) have a Built-in Preamp (Line Output) and some Amplifiers/Speakers have a Built-in Preamp
(Phono Input). Ensure you do not use an external Preamp if using a Built-in Preamp.
**Connecting a ground wire from the Preamp to the Powered Speakers may not be needed. If experiencing humming or
other audio issues it is recommended to connect a ground wire to a screw on the back of the active Powered Speaker.
For additional information, resources, or support, visit www.fluance.com/support