HP 201723-B21 - StorageWorks Modular SAN Array 1000 Hard Drive Administration Manual page 36

Message Id
VDS_E_OBJECT_OUT_OF_SYNC
VDS_E_MISSING_
VDS_E_DISK_PNP_REG_CORRUPT
VDS_E_LBN_REMAP_ENABLED_FLAG
VDS_E_NO_DRIVELETTER_FLAG
VDS_E_REVERT_ON_CLOSE
VDS_E_REVERT_ON_CLOSE_SET
VDS_E_REVERT_ON_CLOSE_MISMATCH
VDS_E_IA64_BOOT_MIRRORED_TO_MBR
VDS_S_IA64_BOOT_MIRRORED_TO_MBR
VDS_S_UNABLE_TO_GET_GPT_AT-
TRIBUTES
VDS_E_VOLUME_TEMPORARILY_
DISMOUNTED
VDS_E_VOLUME_PERMANENTLY_
DISMOUNTED
VDS_E_VOLUME_HAS_PATH
VDS_E_TIMEOUT
VDS_E_REPAIR_VOLUMESTATE
VDS_E_LDM_TIMEOUT
VDS_E_PLEX_NOT_REGENERATED
VDS_E_RETRY
VDS_E_ONLINE_PACK_EXISTS
36
Troubleshooting
MessageID
Value (hex)
0x80042453L
0x80042454L
0x80042455L
0x80042456L
0x80042457L
0x80042458L
0x80042459L
0x80042459L
0x8004245AL
0x0004245AL
0x0004245BL
0x8004245CL
0x8004245DL
0x8004245EL
0x8004245FL
0x80042460L
0x80042461L
0x80042462L
0x80042463L
0x80042464L
Message Text
The system's information about the object
may not be up to date.
Operation failed. The disk is missing.
The provider's list of Pnp registered disks has
become corrupt.
The provider does not support the LBN
REMAP ENABLED volume flag.
The provider does not support the NO
DRIVELETTER volume flag.
REVERT ON CLOSE should only be set if the
HIDDEN or READ ONLY volume flag is set.
A REVERT ON CLOSE volume flag is already
set for this volume.
When clearing volume flags that have
been set using revert on close, the same
combination of HIDDEN and/or READ ONLY
flags must be passed to both the SetFlags and
ClearFlags calls.
Not Used! You have mirrored your boot
volume on a GPT disk, to an MBR disk. You
will not be able to boot your machine from
the secondary plex.
You have mirrored your boot volume on a GPT
disk, to an MBR disk. You will not be able to
boot your machine from the secondary plex.
Unable to retrieve the GPT attributes for this
volume, (hidden, read only and no drive
letter).
The volume is temporarily dismounted.
The volume is permanently dismounted.
The volume still has access path to it.
The operation timed out.
The operation could not be completed. To
repair a volume, both the volume and plex
must be online, and must not be healthy or
rebuilding.
The operation timed out in the Logical Disk
Manager Administrative service. Retry the
operation.
The operation failed. Cannot retain plex that
has not regenerated.
The operation failed. Retry the operation.
Create pack operation failed. An online pack
already exists.