SAMCOM FPCN10A Troubleshooting

FPCN10A Trouble Shooting
No Power
Unable to talk or hear members in
your group
Poor audio quality, static, noise and
Lorem ipsum dolor sit amet, consectetur adipisicing elit.
interference
The voice is not clear and loud
Can't talk to other Intercoms ( Like
FTAN10A/FTAN20A/FTAN30A
Model
The battery may have been exhausted.Please recharge
or replace the battery pack.The battery pack may not be
installed correctly. Please check and install it again.
空白演示
Make sure you are using the same frequency and
CTCSS tone as other members in your group. Other
group members maybe too far away from you , make
sure you are in the radio's operation range.
1.Re-turn on the radio
2.Adjust Volume
3.Do not put two stations too close,keep a distance of 12
feet would be better.
Adjust the volume first and check whether the MIC is
blocked
Please check all station's switch are set to A position
and same channel