Honeywell 7900L0P-422C20E - Hand Held Products Dolphin 7900 User Manual page 74

2. In the list, tap on an adapter to review its settings. (Server-assigned IP addresses use DHCP.)
3. If you make a change on one of these tabs, tap OK. The following message appears:
4. You must perform a soft reset to update the registry; see
new registry entries created by the changes can be read by the applications that need them.
Do NOT perform a hard reset (see
!
terminal to factory defaults, which means that any network adapter modifications are lost.
6 - 18
Soft Reset (Warm Boot)
Hard Reset (Cold Boot) on page
Rev F
10/16/07
on page 2-11.
2-11) after modifying an adapter here. Hard resets return the
Dolphin® 7900 User's Guide
During the soft reset, the