Gps Demo; Accessing Gpsdemo; Setup Tab - Honeywell 7900L0P-422C20E - Hand Held Products Dolphin 7900 User Manual

GPS Demo

GPSdemo is a software application that comes loaded on GPS units and demonstrates the basic capabilities of the GPS module.
GPSdemo accesses the serial port directly. This means that GPSdemo does not use the GPS Intermediate Driver provided by
Microsoft because the GPS Intermediate Driver uses virtual COM ports to communicate, which is not necessary on Dolphin GPS
units. For more information about Microsoft's GPS Intermediate Driver, follow this link: http://msdn2.microsoft.com/en-us/library/
ms850332.aspx

Accessing GPSdemo

When you start GPSdemo, the terminal automatically begins acquiring GPS data.
Tap Start > Programs > GPSdemo

Setup Tab

The port can be opened only if the GPS module is powered. If the GPS module is not powered, no NMEA data strings will appear.
Check the Power Tab (see page 11-8) to see the power status of the GPS module.
Logging
If you want the NMEA text data to be saved to a log file tap the Start Log button. You will be prompted for a file name and for a
storage location of the log file.
The maximum size of a log file is 5MB. If this limit is reached or if available memory has been exhausted, logging will stop and
a notification message will be displayed informing you that the log file has reached its size limit.
11 - 6
. The GPSdemo opens displaying the
Rev F
10/16/07
Setup Tab (see page 11-6).
To open a GPS connection, tap the
Open Port button.
After a successful open, NMEA data
strings will begin to be displayed in
the data window.
Dolphin® 7900 User's Guide