6. Pull smoothly and evenly from left to right until the screen protector is applied.
Press gently but firmly.
7. Use the card as necessary to smooth out any air pockets or bumps after application.
Press gently but firmly.
8. Press the Backlight
9. Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector.
10. Press the Blue
3 - 8
key to wake the terminal and check the touch panel with the stylus.
+ Backlight
keys to put the terminal back in
Touch Panel
Rev C
11/17/2008
Suspend Mode
(see page 3-26).
Dolphin® 7600 Mobile Computer
User's Guide