Chapter 12 - Dolphin Mobile Mount; Overview; Inserting A Terminal - Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600 User Manual
User guide
Hide thumbs
Also See for 7600BP-112-B6EE - Hand Held Products Dolphin 7600:
- User manual (144 pages) ,
- Quick start manual (12 pages) ,
- Supplementary manual (4 pages)
Table of Contents
Advertisement
12
Dolphin Mobile Mount
Overview
The Dolphin Mobile Mount provides easy and secure access to the Dolphin terminal in mobile
environments.
We recommend use of Hand Held Products peripherals, power cables, and power adapters. Use of any non-
Hand Held Products peripherals, cables, or power adapters may cause damage not covered by the warranty.
Out of the Box
The Dolphin Mobile Mount ships with
• The plastic mount, which holds one Dolphin 7600 terminal
• A standard, RAM (101-B) mounting bracket with two universal ball joints.
• The nuts and bolts required for installation.
Note: The Dolphin Mobile Mount is not intended for use the imaging/scanning applications.
Inserting a Terminal
Note: It is recommended that you install one of the ball mounts on the back panel before inserting a terminal; see
Mounting
on page
1. Insert the back panel of a terminal into the Mobile Mount and gently place the lip of the top of the
latch in place at the bottom of the image engine window.
Do NOT pull back on the latch and snap in place! Make sure that the Dolphin terminal is securely
fastened inside the mount but do not use excessive force.
®
Dolphin
7600 Mobile Computer
User's Guide
12-3.
Latch
Rev C
11/17/2008
12 - 1
Advertisement
Table of Contents
