Stadler Form Karl Filling Instructions

How to fill Karl & Karl big using the top filling flap?
1. Open the fold-out flap to fill in water by pushing on it (see blue arrow).
2. Fill water directly into the opening of the flap from the front (see blue arrow).
Please ensure that no water spills onto the top part of the device. The easiest
way to fill water is by using a clean watering can, a water bottle or a similar
container.
3. Stop filling water when the maximum level is reached ("MAX" indicates maximum water level). Look inside the
water container to find two pillars, one with "MID" (medium water level) and "MAX" (maximum water level).
4. Close the fold-out flap again by pressing it down until it clicks into place.
Jan-24
Stadler Form Karl & Karl big water filling instructions
How to fill Karl & Karl big by lifting off the upper part?
1. Lift off the upper part of the device (see blue arrow).
2. Fill the lower part with clean, cold tap water up to the maximum mark
directly from the tap or use a clean watering can to fill the container.
4. Put the upper part back on the lower part. Make sure it fits properly.