Hiding And Adding Pages - Universal Remote Control MX-350 - SPECS SHEET Owner's Manual

T h e M X - 3 5 0
Note: If a number is repeated when setting the channel (for example,channel
"33" or "522") it is usually best to set a half second delay in between the
identical numbers by pressing the PAUSE button. Each press of the PAUSE
button increases the delay by a half second.
Press the LIGHT button after you enter the
7
channel number. A new screen appears:
To save the channel you entered, press the SAVE button. The
UNDO button lets you erase the last entry. The EXIT button erases
all entries for this button.
When you are finished setting up Favorite Channel buttons, press
8
the MAIN button twice to return to normal operation.
22
Use the PAUSE Button to set
delays between steps, each press
of the pause button increases the
delay by a half second.
SAVE
Button
U n i v e r s a l R e m o t e C o n t r o l , I n c .

Hiding and Adding Pages

Each of your MX-350 Devices contains up to eight pages (if a page has no
IR data, it will be HIDDEN). However, you can HIDE any page from the
users view. A hidden page still appears in SETUP modes, so can be used
in macros. If you change your mind and would like the user to see a
hidden page, you can ADD them. You can add or hide pages on devices,
or on your favorite channel pages using this simple process:
Note: Be sure to program your Macros before you hide pages with a poten-
tial macro step in them. You can't access hidden pages during macro setup.
However, after you finish Macro setup, you can hide pages without affect-
ing operation of your macros.
Enter SETUP mode by pressing and holding both MAIN and ENT
1
for three seconds.
Note: You have 30 seconds for each step, otherwise the MX-350 will time out
automatically.
2
Press the EDIT button.
3
Press the PAGE button.
"PAGE" appears at the top of the screen.
23
EDIT
Button
PAGE
Button