Universal Remote Control 8 IN 1 Manual page 20

8 in 1 universal remote control unit
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6
3. Druk op SET en „2"
LED knippert 2 keer.
4. Druk op SET en „3"
LED knippert 8 keer.
E. Reset / Wisfunctie:
Om de ingevoerde codes van de afstandsbedie-
ning te wissen, drukt u op de SET –toets en u
houdt deze ingedrukt. Druk vervolgens langer
dan 3 seconden op de toets "NUL". De LED zal
2 keer knipperen en alle opgeslagen codes van
de afstandsbediening zijn gewist.
F. Overschrijfbeveiliging van de
apparatuurcodes:
Om de apparatuurcodes tegen onopzettelijk
overschrijven / wissen te beveiligen, gaat u als
volgt te werk:
1. Druk op de apparatuurgroep- toets ( TV ),
druk op de SET-toets en houdt deze inge-
drukt en druk vervolgens op de toets "7"
op het cijferblok. Laat vervolgens beide
toetsen los. De LED knippert 2 keer en de
code is daarna tegen overschrijven / wissen
beveiligd.
2. Om de overschrijfbeveiliging op te heffen,
drukt u op de SET-toets en u houdt deze
ingedrukt, druk nu op de toets "8", de LED
knippert 2 keer en de beveiliging is opge-
heven.
G On Screen Menu Control :
Uw
nieuwe
afstandsbediening
voorgeprogrameerd om het menu te bedienen.
Alleen als uw apparaat (TV,VCR,DVD,SAT)
is uitgerust met een zogenaamde ON SCREEN
functie drukt u vervolgens op de [MENU] toets
Schrijf de 3-cijferige codes voor de divere apparaten hieronder in de vakjes.
TV
DVD
van uw afstandsbediening. Het [MENU] licht
op, nu kunt u met de curser door het menu
scrollen. Met de [OK] toets kunt u vervolgens
bevestigen.
H. Kleur / brightness, Bass /
Treble etc.
De kleur / brightness, bass en treble van uw te-
levisie kunt u veranderen via het ON SCREEN
menu ( zie hierboven).
Service en garantie
Uw nieuwe afstandsbediening is voorge-
programmeerd met alle basisfuncties van
uw orginele afstandsbediening. Dit houdt
in dat de installatie van nieuwe kanalen in
uw televisie alleen via het ON SCREEN
menu geactiveerd kan worden.(als deze
functie beshikbaar is op uw televisie).
Voor service en garantie, kunt u ons op onder-
staand adres bereiken:
Service Center:
European Distribution Centre
Londoner Strasse 11
D-48455 Gildehaus
Germany
E-Mail:
Info@SupportPlus.org
Tel. nat./internat.:
00800 77 77 88 99
is
reeds
Code lijst per merk :
De code lijst per merk is achterin deze handlei-
ding geprint.
SAT
VCR TUNER
19
CD
TAPE
AUX

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8 IN 1 and is the answer not in the manual?

Questions and answers

Dolores
January 28, 2025

Come posso memorizzare automaticamente il telecomando sulla TV hkc

1 comments:
Mr. Anderson
February 10, 2025

To automatically program the 8 IN 1 Universal Remote Control with an HKC TV, follow these steps:

1. Turn on your HKC TV manually.
2. Press and hold the SET key on the remote.
3. While holding the SET key, press the TV button and keep holding both until the LED light stays on.
4. Release both buttons.
5. Press the POWER button repeatedly until the TV turns off. Each press sends a new code.
6. Once the TV turns off, press the SET button to save the code.
7. Test the remote by turning the TV on and checking if basic functions work.

If some keys do not work, repeat the process to find a better code.

This answer is automatically generated

Deborah
February 13, 2025

Memorizzare automaticamente il telecomando marca lg

Alhagieansumana Diba
April 23, 2025

How to connect Emi power universal remote mode:AN-5104 to LG tv

User image 68091be01329e

This manual is also suitable for:

Sp-urc-81-l8 1

Table of Contents

Save PDF