NOTE / Do not dry the front panel or the air filter in direct sunlight. (Exposure to direct sunlight
may discolour or deform the panel.)
10. Servicing Information
10.1. Control Board Removal Procedure
1. Remove the screws in front and both sides of the chassis as
indicated (1), (2) and (3).
2. Release the tabs at both sides of the front grille (push in the
cabinet and pull out the grille).Then, pull up the grille as to release
another two tabs at the top side of the grille.
3. Pull out the knobs from its position (1) & (2) and then take out the
control panel (3). Then, release the temperature sensor from its
holder (4) and pull out the wire from the bushing at the cabinet (5).
Need help?
Do you have a question about the CW-C100VP-1 and is the answer not in the manual?