Nokia ONT G-1425G-B Quick Reference Manual

1. Product Overview
The Nokia optical network terminal (ONT) G-1425G-B is the solution
for home networking that is delivered by Gigabit Passive Optical
Network (GPON). The device has built-in concurrent dual-band Wi-Fi®
802.11b/g/n and 802.11ac networking for high-capacity Wi-Fi
connectivity. The G-1425G-B supports Wi-Fi 5 and Wi-Fi EasyMesh™,
to create a whole home mesh network. This coverage can be
expanded at any time by installing additional Wi-Fi EasyMesh-capable
beacons to ensure seamless roaming throughout the home. The G-
1425G-B includes the Nokia WiFi Mesh Middleware which ensures the
best possible Wi-Fi performance. The end-user experience is
enhanced by the intuitive Nokia WiFi mobile app and by the service
provider's Wi-Fi management capabilities in the cloud.
A. Technical Specifications
Height: 138 mm (5.4 in) without antenna
Width: 180 mm (7.1 in)
Depth: 37 mm (1.5 in) without base
Desk mountable and wall mountable
Power consumption:
Standby mode: 4.9 W
•
Typical mode: 6.9 W
•
B. Manufacturer Information
For Products Purchased in EU/EAA Countries
The products are manufactured and imported by:
Nokia Solutions and Networks Oy.
Karakaari 7, 02160
Espoo, Finland.
For Products Purchased in the United States
The products are imported by Nokia of America Corporation.
Offices: https://www.nokia.com/contact-us/offices/#north-
•
america
Nokia ONT G-1425G-B Quick Reference Guide
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
Support: https://www.nokia.com/networks/business-support/
•
Other contacts: https://www.nokia.com/contact-us/
•
Please contact your Internet Services Provider in case of questions
on the product.
2. Safety Guidelines
ALWAYS READ THE PRODUCT GUIDE BEFORE SET UP OR USE OF THE
PRODUCT. IT IS YOUR RESPONSIBILITY TO FAMILIARIZE YOURSELF
WITH THE PRODUCT GUIDE AND WARNINGS, AND TO USE A PRODUCT
PROPERLY. CONTACT YOUR INTERNET SERVICES PROVIDER FOR
FURTHER QUESTIONS.
Warning - Risk of electric shock or fire
Connect the Product power adaptor or cord to the right supply
voltage (for example, 230V in Europe, Turkey, Ukraine, 120V AC
in US, 230V in Australia and New Zealand, 230V in South Africa, 220V
in Russia, Morocco).
The socket-outlet shall be easily accessible.
Pay attention to the power load of the electrical outlet and possible
extension cord. An overburdened power outlet or damaged cords
and plugs may cause electric shock or fire. Check the power cords
regularly. If you find any damage, replace the cord immediately.
Do not connect the plug into an extension cord, receptacle, or other
outlet unless the plug can be fully inserted with no part of the blades
exposed.
Leave adequate space for heat dissipation to avoid any damage
caused by overheating the Product. Do not cover the Product or its
ventilation holes. Blocking the ventilation holes may cause fire.
Use the power adapter provided with your Product and do not fasten
the power cable to building surfaces. Ensure the cable can move
freely. Do not place heavy objects on the cable.
Do not use the Product outside, and make sure all the connections
are indoors.
Do not install, use, or service this Product during a thunderstorm.
There is a remote risk of electric shock from lightning.
Caution - Potential equipment damage
Follow these recommendations to protect yourself and the Product
from harm:
Do not look directly at the optical port without protection.
•
Do not insert any sharp object into the openings of a Product.
•
Do not put the Product near a heat source. Avoid placing the
•
Product in direct sunlight.
Do not put the Product in damp or wet locations; for example,
•
near a bathtub, washbowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool. Do not spill any liquid on
the Product.
Do not touch the Product or its power adapter or cord with wet
•
hands.
Do not place the Product on an unstable surface or support.
•
CID 212608
3FE-49937-AAAA-TCZZB
Issue 2, July 2022