Norwood KWIK-TILL HSD2600 Quick Start Manual

Notes: This is an abbreviated quick start guide, please reference Operator's Manual for complete instructions
SCV Function
1 1 Front Wheel Lift Front Wheel Lift
Rear Roller Lift Rear Roller Lift
2 2
Main Frame Lift Main Frame Lift
3 3
Wing Fold
4
5 5 Hitch Jack Lift Hitch Jack Lift
6 6 Optional Equipment Optional Equipment
5 5
HSD2600-HSD4600
UNFOLDING OPERATION
1. Move the Transport Locks from Locked Position to
Stowed Position.
2. Extend Main Frame Lift
Rollers clear the Transport Rests.
3. Extend Wing Fold 4
with Center Section.
4. Extend Main Frame Lift
contact the ground.
5. Set Main Frame Lift
POSITION
FOLDING OPERATION
1. Retract Main Frame Lift
from the ground.
2. Retract Wing Fold 4
above Transport Rests. Ensure Wing Transport Rollers
clear Transport Rests.
3. Retract Main Frame Lift
supported by Transport Rests. Temporarily relieve
downward pressure against the transport rests.
4. Move Transport Locks from Stowed Position into
Locked Position.
KWIK-START
3 3 cylinders until Wing Transport
4 cylinders until the Wings are aligned
3 3 cylinders until Rear Rollers
3 3 & Wing Fold 4 4 Remotes to FLOAT
.
3 cylinders to raise Tool Bar 3
4 cylinders to fold the Wings inwards
3 cylinders until Wings are
3
6 6
2 2
1 1
6 6
4 4
1 1
3 3
3 3
2 2
6 6
2 2
6 6
2 2
1 1
4 4
1 1
HSD2600-HSD4600
Transport Lock
Locked Stowed
Position
Position
Moving from Locked Position to
Stowed Position
Locked
Position
Set in Locked Position
6 6
6 6
Pin Lock
P/N 55-5-00322
Rev: 5/7/2024