<
>
3. Use
/
to highlight any portion of the channel row and change that setting.
Options are:
Position – indicates the order of the channel in LISTINGS.
Channel – determines whether or not the channel displays in the Guide.
• On – channel is always displayed in LISTINGS.
• Auto-hide – channel is displayed in LISTINGS only when show information is
• Off – channel is never displayed in LISTINGS (channel row appears gray in
Tune channel – shows the channel number that displays in LISTINGS
NOTE: The transmitted data determines the default setting for each channel.
Use your remote control the make the appropriate changes. To do this, highlight the
portion of the row you want to modify and follow the instructions provided on-
screen in the Info Box.
Option
Channel position
Channel displays in
Listings grid and
Search results
Tune channel.
Warning: If you receive both analog and digital versions of the same channel, do not change
the tune channel number of the analog station to match the digital channel number
as this may hinder the ability of the Guide to receive data.
Instead, locate the digital station in the channel editor and, if necessary, change
the channel row position to a location you prefer—you can also "hide" the analog
channel so it does not appear in LISTINGS.
available.
the Channel Editor.)
Highlight Position
RC Buttons
Up and Down Arrow
to move position, or
Numbers to input new
channel position.
Enter to cycle through
choices (on, auto, off).
Numbers
to
input
appropriate channel.
13