Sealey SV10.8 Series Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instructions gloves
1. SAFETY
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all
‰
instructions listed below may result in electric shock, fire and/or serious injury.
Save all warning and instructions for future reference.
9
1.1. WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
9
DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools
8
create sparks which may ignite the dust or fumes.
Keep children and bystanders away whilst operating a power tool. Distractions can cause you to lose control.
9
Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment
9
Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area of operation.
DO NOT operate the power tool near flammable materials. Sparks could ignite these materials.
8
1.2. ELECTRICAL SAFETY
DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
8
Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden
9
wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an
electric shock.
1.3. PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a power tool.
9
DO NOT use a power tool whilst you are tired or under the influence of drugs, alcohol, or medication. A moment inattention whilst
8
operating power tools may result in serious injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard
9
hat or hearing protection use for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
9
Carrying power tools with your fingers on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power
9
tool may result in personal injury.
DO NOT overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
8
Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes,
9
jewellery or long hair can be caught in moving parts.
NEVER lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the surface and
8
pull the power tool out of your control.
DO NOT run the power tool while carrying it at your side. Accidental contact with the spinning accessory could snag your clothing,
8
pulling the accessory into your body.
1.4. POWER TOOL USE & CARE
DO NOT force the power tool. Use the correct power tool for your application. The correct Power tool will do the job better and safer at
8
the rate for which it was designed.
DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is
8
dangerous and must be repaired.
Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such
9
preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and DO NOT allow persons unfamiliar with these power tools or these instructions to
9
operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or biding of the moving parts, breakage of parts and any other condition that may affect the
9
power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
9
Use the power tool, accessories, and tool bits etc, in accordance with these instructions, taking into account the working conditions and
9
the work to be performed. Use of the power tool for operations different from those intended could results in a hazardous situation.
This power tool is intended to function as a grinder. Read all safety warnings, instructions, illustrations and specifications provided with
9
this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Operations such as sanding, wire brushing or polishing are not recommended to be performed with this power tool. Operations for
9
which the power tool was not designed may create a hazard and cause personal injury.
DO NOT use accessories which are not specifically designed and recommended by the tool manufacturer. Just because the accessory
8
© Jack Sealey Limited
10.8V SV10.8 SERIES Ø76MM CORDLESS ANGLE
GRINDER - BODY ONLY
CP108VAGBO.V2
MODEL NO:
Wear eye Wear ear
protection protection
Original Language Version
Wear a mask
CP108VAGBO.V2 Issue 2 17/04/24