Sealey SV10.8 Series Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instruction gloves
manual
DANGER
Keep hands away from blade
1. SAFETY
1.1. GENERAL POWERED TOOL SAFETY WARNINGS
Read all the safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
Save all warning and instructions for future reference.
9
Inspect and ensure equipment is in good working order before use.
9
Maintain and clean tool and battery pack regularly. check air holes are clear.
9
WARNING! Hold the power tool by insulated gripping surfaces only, as the cutter blade may contact hidden wiring. Cutter blades
‰
contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
WARNING! Risk assess the work area. Keep bystanders and children away from the work area. DO NOT operate with anyone or pets
‰
nearby. Check intended work area for wildlife.
WARNING! Prevent unintentional starting. Ensure the switch is in the OFF position before connecting to the power source and/or battery
‰
pack, picking up or carrying the tool. Carrying power tools with your fingers on the switch or energising power tools that have the switch on
invites accidents.
WARNING! Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an
‰
increased risk of electric shock if your body is earthed or grounded.
WARNING! Keep work area clean and well lit. Cluttered or dark areas invite the risk of accidents.
‰
WARNING! Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of a
‰
power tool may result in personal injury.
WARNING! DO NOT allow water to enter into power tool. This will increase the risk of an electric shock.
‰
WARNING! Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with
‰
water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
WARNING! Always check the hedge before cutting for foreign objects, electrical cables etc.
‰
WARNING! Use of the power tool, accessories, and tool bits etc, in accordance with these instructions, taking into account the working
‰
conditions, and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous
situation and serious injury.
DO NOT use if power tool vibrates abnormally, switch off, remove battery and then inspect.
8
DO NOT touch hazardous moving parts. Allow power tool to come to a complete stop first.
8
DO NOT use if damaged. DO NOT operate with defective guards or shields or without safety devices, and protective clothing.
8
DO NOT use for a task it was not designed to perform.
8
Always store with the battery removed and separate from the power tool, in a dry, childproof location.
9
DO NOT force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at
8
the rate for which it was designed.
The hedge trimmer is intended to be used by the operator at ground level and not on ladders or any other unstable support.
9
Hedge trimmer is fitted with a hand shield.
9
Hedge trimmer has a measured Sound power level 96dB. And has been tested in accordance with the outdoors Noise by Equipment
9
Regulations 2001.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of
9
electric shock if your body is earthed or grounded.
1.2. WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
9
DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create
8
sparks which may ignite the dust or fumes.
Keep children and bystanders away whilst operating a power tool. Distractions can cause you to lose control.
9
© Jack Sealey Limited
SV10.8 SERIES CORDLESS HEDGE TRIMMER
10.8V - BODY ONLY
MODEL NO:
Wear eye Wear ear Wear protective
protection protection
Original Language Version
CP108VHTBO
Risk of electric
clothing
shock
Wear
Do not use in
appropriate
rain
footwear
CP108VHTBO Issue 1
Keep
bystanders
Away
16/12/24