Sealey SV10.8 Series Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
Wear face Beware of
shield Kickback
1. SAFETY
NOTE: Seek professional advice and training to ensure safe and effective use of this tool.
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this tool. Failure to follow all
‰
instructions listed below may result in electric shock, fire and/or serious injury.
Save all warning and instructions for future reference.
9
WARNING! Disconnect the saw from the battery unit before changing accessories, servicing, performing any maintenance or storing.
‰
1.1. WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark area invites accidents
9
DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools
8
create sparks which may ignite the dust or fumes.
Keep children and bystanders away whilst operating a power tool. Distractions can cause you to lose control.
9
1.2. ELECTRICAL SAFETY
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk
‰
of electric shock if your body is earthed or grounded.
DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
8
1.3. PERSONAL SAFETY
DO NOT use a power tool whilst you are tired or under the influence of drugs, alcohol, or medication. A moment inattention whilst
8
operating power tools may result in serious injury.
DO NOT overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected
8
situations.
Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes,
8
jewellery or long hair can be caught in moving parts.
DO NOT let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A
8
careless action can cause severe injury within a fraction of a second.
Stay alert, watch what you are doing and use common sense when operating a power tool.
9
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes,
9
hard hat or hearing protection use for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking
9
up or carrying the tool. Carrying power tools with your fingers on the switch or energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power
9
tool may result in personal injury.
1.4. POWER TOOL USE AND CARE
DO NOT force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer
8
at the rate for which it was designed.
DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is
8
dangerous and must be repaired.
Remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power
9
tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and DO NOT allow persons unfamiliar with these power tools or these instructions
9
to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of the moving parts, breakage of parts and any other
9
condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
© Jack Sealey Limited
SV10.8 SERIES CORDLESS PRUNING SAW
10.8V - BODY ONLY
MODEL NO:
Wear protective Keep Dry
gloves
Keep bystanders Use both hands
away
Original Language Version
CP108VPSBO
Wear head Wear ear
protection protection
Appropriate Avoid touching
Protection Foot- tip to avoid
leg, Hand-Arm kickback
Wear protective Wear safety
clothing footwear
CP108VPSBO Issue 1 19/12/24