45MBFAQ
Floor Console Unit Ductless System
Sizes 09K to 16K
Fig. 1 -Sizes 09K - 16K
NOTES: Read the entire instruction manual before starting the
installation. Images are for illustration purposes only.
TABLE OF CONTENTS
COMPATIBILITY........................................................................... 8
PARTS LIST .................................................................................... 9
ACCESSORIES ............................................................................... 10
MODEL NUMBERS ....................................................................... 10
WIRING ........................................................................................... 11
DIMENSIONS ................................................................................. 12
WIRING DIAGRAM....................................................................... 14
E. UNIT WIRING............................................................................ 23
UNIT WIRING ................................................................................ 24
LATION (OPTIONAL) ................................................................... 26
TROUBLESHOOTING................................................................... 27
Installation Instruction
PAGE
Specifications subject to change without notice.
SAFETY CONSIDERATIONS
Installing, starting up, and servicing air- conditioning equipment can
be hazardous due to system pressures, electrical components, and
equipment location (roofs, elevated structures, etc.).
Only trained, qualified installers and service mechanics should install,
start- up, and service this equipment.
Untrained personnel can perform basic maintenance functions such as
coil cleaning. All other operations should be performed by trained
service personnel only.
When working on the equipment, observe the precautions in the
literature and on tags, stickers, and labels attached to the equipment.
Follow all safety codes.Wear safety glasses and work gloves. Keep a
quenching cloth and a fire extinguisher nearby when brazing. Use care
in handling, rigging, and setting bulky equipment.
Read these instructions thoroughly and follow all warnings or
cautions included in the literature and attached to the unit. Consult
local building codes and National Electrical Code (NEC) for special
requirements. Recognize safety information.
This is the safety-alert symbol.
When you see this symbol on the unit and in instructions or manuals,
be alert to the potential for personal injury. Understand these signal
words: DANGER, WARNING, and CAUTION. These words are
used with the safety- alert symbol.
DANGER identifies the most serious hazards which will result in
severe personal injury or death.
WARNING signifies hazards which could result in personal injury or
death.
CAUTION is used to identify unsafe practices which may result in
minor personal injury or product and property damage.
NOTE is used to highlight suggestions which will result in
enhanced installation, reliability, or operation.
The following symbols may be seen on the unit.
Need help?
Do you have a question about the 45MBFAQ and is the answer not in the manual?
Questions and answers