Advertisement
CITYSTORM SERVICE INSTRUCTION
Stem watch
■ How to use stem watch?
A: SET
B
B: MODE
Method of displaying the date:
Press the button A to display the DATE.
Method to display the time:
Press the button A twice to display the time.
Method of setting:
Step1: Press the button B twice to enter setting mode.
Step2: Press the button A to change the value.
Step3: Press the button B to confirm the setting and
move to the next digit to be set.
Step4: Set each digit in order from date to time.
Step5: After the minutes have been set, press button A
to return to normal display.
■ How to replace the battery?
Loosen the stem watch fixing bolt
:
Step 1
with 3mm Allen key.
Bolt
Tightening torque: 1.9-3.4Nm
Push the stem watch up with
:
Step 2
3mm Allen key.
Loosen the cover fixing screw
:
Step 3
with screwdriver.
Replace the battery (LR921) with
:
Step 4
a new one.
!
CAUTION
The battery has polarity (+/- sides), so
be sure to install the battery with the + side upward as
shown in the diagram.
A
Rear light
■ How to replace the battery
:
Step 1
:
Step 2
-
+
-
+
!
CAUTION
The battery has polarity (+/- sides), so
be sure to install the battery as shown in the diagram.
■ How to install the rear light onto saddle
:
Step 1
Fixing link
Fixing bolt
:
Step 2
2
Take out the cover with coin.
Replace with new battery
(SIZE AAA).
Loosen the rear light fixing bolt
with 4mm Allen key.
Remove the rear light and fixing
link.
Install onto saddle IN THE
FOLLOWING ORDER: one
rear light, one fixing bolt.
Tighten the rear light fixing bolt
with 4mm Allen key.
Tightening torque:2.9-5.8Nm
Advertisement
