Related Manuals for 3M BeamWalk
Summary of Contents for 3M BeamWalk
- Page 1 3M Occupational Health and Environmental Safety Fall Protection Equipment BeamWalk Sliding Beam Anchor User Instructions User Instructions for 3M BeamWalk Sliding Beam Anchors. Important: Keep these User Instructions for reference.
- Page 2 BeamWalk Anchors are designed for single users (including clothing, tools, etc.) with a capacity up to 400 pounds (181 kg). BeamWalk Anchors fi t beam fl ange widths of 3-1/2 in (89 mm) to 12 in (305 mm), and beam fl ange thickness of 1/4 in (6 mm) to 1-1/4 in (32 mm).
- Page 3 Warning: Do not use near open beam end where the BeamWalk Anchor can slide off the beam fl ange. Press both pawl triggers and slide the fl ange hooks to the outermost ends of the support bar. Set the BeamWalk Anchor on the desired beam fl...
- Page 4 Warranty does not cover equipment damage resulting from wear, abuse, damage in transit, failure to maintain the product or other damage beyond the control of 3M. 3M shall be the sole judge of product condition and warranty options. This warranty applies only to original purchaser and is the only warranty applicable to this product.
Need help?
Do you have a question about the BeamWalk and is the answer not in the manual?
Questions and answers