Advertisement
Read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain.
Check that the device packaging has not been tampered with and make sure that all contents are present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.
The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for the device:
| WARNING Warning notice indicating a risk of injury or damage to health. | ||
| IMPORTANT Safety note indicating possible damage to the device/accessory. | ||
| NOTE Note on important information | ||
![]() | Observe the instructions for use | ||
![]() | Disposal in accordance with the Waste Electrical and Electronic Equipment EC Directive – WEEE | ||
![]() | Do not dispose of batteries containing hazardous substances with household waste | ||
![]() | Dispose of packaging in an environmentally friendly manner | ||
![]() | This product satisfies the requirements of the applicable European and national directives. | ||
![]() | Manufacturer | ||
![]() | Danger of tipping: position yourself in the centre of the weighing surface. | ![]() | Danger of slipping: do not step on the scale with wet feet. |
![]() | Place the scale on an even surface. No carpet. | ![]() | Do not load the scale beyond 150 kg/330 lb/24 st. |
The device is only intended for weighing humans and for recording your personal fitness data. The device is only intended for private use, and not for medical or commercial purposes.
The device has 5 language settings:
German (DE), French (FR), English (GB), Spanish (ES) and Russian (RUS) The device is set to German when supplied to the customer.
To change the language, switch the scale on as described in the "Measuring weight" chapter and wait until "" is shown on the display. Now press the middle button, "Language", on the back of the scale, until the desired language is announced.
You can adjust the volume of the language function as you wish, or switch it off by repeatedly pressing the "" button on the back of the scale.
Note: Language off (no beep) means that voice output is not selected and the measurement value will not be announced.
This scale is used to determine the weight of human beings. The scale has a weighing range up to 150 kg.
If present, pull the battery insulating strip off the battery compartment cover or remove the battery's protective film and insert the battery according to the polarity. If the scale fails to operate, remove the battery completely and insert it again. Your scale is equipped with a "replace battery" indicator. When the scale is operated with a battery which is too weak, "Lo" appears in the display field and the scale automatically switches off.
Display:
Battery weak
The battery must be replaced in this case (3 x AAA 1,5V).
Place the scale on a firm, flat surface; a firm floor covering is a basic requirement for correct weight measurement.
When supplied to the customer, the scales are set to weigh in "kg". To the rear of the scales, there is a button „kg/lb/st" which you can use to change to 'pounds' and 'stones' when the scale is in English.
Place the scale on a firm level floor (no carpet); a firm floor covering is required for correct measurement.
Audibly, briefly and firmly tap the scale with your foot to active the vibration sensor!
The entire display (Fig. 1)
appears up to "" (Fig. 2) as a self-test (tap-on technology).
Display:
Beep
Now the scale is ready to measure your weight.
Display:
The device is ready for use
Now step onto the scale. Stand still on the scale with your weight distributed evenly between both legs. The scale immediately begins to measure your weight. After flashing twice the final measurement result appears on the display. (Fig. 3)
There is also an acoustic output. The scale switches off 10 seconds after you step down from it. The measuring result remains visible during this time.
If the scale detects an error during weighing, "" or "
" appears in the display (Fig. 4+5).
Display:
Error
If a weight of more than 150 kg is placed on the scale, " is displayed (Fig. 6).
Display:
Overload
Make sure that you always switch on the scale first and wait for the display "" (Fig. 2) before stepping on.
The scale has 4 memory spaces (pushbuttons 1-4).
Switch on the scale as described in "Measuring weight" and wait until the display shows "" (Fig. 2).
Now press the desired storage location (1, 2, 3 or 4).
For example, press the "1" button that appears in the upper left-hand corner of the display "User 1".
Display: User 1
Memory space 1
Now the scale is ready to measure your weight, as described in "Measuring weight".
The measurement is automatically saved in the respective user memory. If necessary, a previous measurement is exceeded.
Press the button for the desired storage location when the scale is switched off. The saved measurement is shown.
Display: User 1 62,4 kg
Memory space 1 user memory 62,4 kg
The complete display appears briefly as a self test (Fig.1), until "" is displayed.
Display:
The device is ready for use
Now the scale is ready to measure your weight, as described in Measuring weight.
The new measurement is automatically saved in the selected storage location.
Tip: An other storage location can be only selected when "
" appears on the display.
The device should be cleaned from time to time.
This should be done using a damp cloth and, if necessary, a small amount of detergent.
If the scale identifies an error during measurement, "", "
" or "
" is displayed.
If you stand on the scale before the display shows "", the scale will not function correctly.
Possible error causes: | Solution: |
|
|
|
|
|
|
Model: | GS 39 |
Dimensions: | 340 mm x 350 mm x 23 mm |
Weight: | Approx. 1950 g |
Measurement range: | 3-150 kg |
Graduation: | 100 g |
Battery: | 3 x 1.5V AAA (LR03) |
Scale interval d: | The display can be read in increments of 0.1 kg. |
Repetition accuracy: | The measuring tolerance for repeated measurements is +/- 0.4 kg (several measurements in direct succession on the same scale with position of scale and person the same as far as possible). |
Absolute precision: | In comparison with a calibrated weight, the measured value is +/-1% +0.1 kg. E.g. at 40 kg this corresponds to +/- 0.5 kg; at 100 kg this corresponds to +/-1.1 kg. |
The accuracy of the measurements and service life of the device depend on its careful handling:
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the GS 39 and is the answer not in the manual?
Questions and answers