Beurer BF 880 (760.08) Manual

INCLUDED IN DELIVERY

Check that the device packaging has not been tampered with and make sure that all contents are present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.

• 1 diagnostic bathroom scale
• 3 AA 1.5 V batteries
• 1 set of instructions for use
• 1 quick guide

SIGNS AND SYMBOLS

The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for the device:

Indicates a potentially impending danger. If it is not avoided, there is a risk of death or serious injury.
Indicates a potentially imminent hazard. If it is not avoided, slight or minor injuries may result.
	Product information Note on important information
	The device may not be used by people with medical implants (e.g. pacemakers), as this may a ect their functionality.
	Manufacturer
	Importer

DEVICE DESCRIPTION

1. Display
2. button (for selecting a user measurement)
3. SET button
4. button (for calling up stored values after the user is selected)
5. Electrodes
6. Battery compartment
7. Measured value
8. Measurement unit
9. Body data
10. Scale connected to Bluetooth
11. Measurement data transfer
12. Scale connected to cloud/server
13. Scale connected to WIFI

USAGE

Prerequisites for taking measurements correctly

• Place the scale on a flat and stable surface.
• Wherever possible, weigh yourself at the same time every day (ideally in the morning), after having been to the toilet, on an empty stomach and without clothing.
• To determine your body fat, always stand barefoot on the electrodes on the scale.
• Stand up straight and still during measurement. Ensure that your weight is evenly distributed.

Creating users in the beurer HealthManager Pro app

The "beurer HealthManager Pro" app makes it easier for you to create user data, is required to transfer measured values and to display additional values (body water content, bone mineral mass, BMR/ AMR, metabolic age).
The scale has 8 memory spaces for different scale users, enabling you to save the various members of your family, for example. You can use the "beurer HealthManager Pro" app to conveniently set up the individual app users and their corresponding scale user via your smartphone. To do so, proceed as follows:

1. Download the free "beurer HealthManager Pro" app from the Apple App Store (iOS) or from Google Play (Android).

This way to the "beurer HealthManager Pro" app

2. Start the app and follow the instructions.
3. Select BF 880 in the app and press the SET button
4. Select WIFI network (SSID) and enter password (network key) to enable data transfer to scale via WIFI. If successful, the cloud and WIFI icons will appear on the display.
5. Set up scale user: if the display shows the scale user (e.g. "U: 1") and "0.0", carry out the initial measurement (for subsequent automatic personal recognition if within +/- 3 kg of the last measurement of this scale user).

Weighing yourself

1. Step onto the scale barefoot. Stand still on the electrodes with both legs, making sure to distribute your weight evenly. The scale switches on automatically.
2. Your body weight appears on the display . The scale user detected (e.g. "U: 1" for scale user 1) should then appear automatically. If the scale has detected several possible scale users or the last weight is more than 3 kg apart, use the button to select the correct scale user and wait 3 seconds.
3. The following values will then appear one after the other.

		Body mass index (a healthy value is 18.5 – 25)
		Body fat percentage (a healthy value is 16 – 28% for women and 11 – 23% for men)
		Muscle percentage (a healthy value is 27 – 43% for women and 37 – 57% for men)

For more details of the values, please see the app or the FAQs at: www.beurer.com

4. If a Bluetooth or WIFI connection has been established and the user measurements have been successfully taken (e.g. for U: 1), the values will be transferred to the "beurer HealthManager Pro" app. This is indicated by the measurement data transfer symbol . If the data cannot be transferred, up to 30 values will be stored per user. As soon as a connection is established, they are transferred with the next measurements.

• If the automatic scale user detection function is not working, briefly press the scale with your foot, press the button repeatedly until your scale user is displayed, and wait 3 seconds. Then take the diagnostic measurement.
• To display your most recent diagnostic measurement, briefly press the scale with your foot, press the button repeatedly until your scale user is displayed, and wait 3 seconds. Then press the button to display the most recent diagnostic measurement. To display further measurements, press the button again. Up to 30 measurements can be shown on the display .
• If the measurement is carried out with shoes or socks on, then only the weight is displayed (when the scale user is recognised, the weight and BMI are displayed and saved).

Creating users without the app

Alternatively, you can also create a scale user directly on the scale without using the app. This process is not required if the scale has already been connected to the app.

1. Press and hold the SET button for 4 seconds. "unit" appears on the display.
2. Press the SET button repeatedly until "on" appears on the display 1
3. Use the button to select the scale user you need (you can select from U: 1 to 8). Confirm your selection with the SET button .
4. "170" flashes on the display. Use the button to set the height. Confirm with the SET button
5. "30" flashes on the display. Use the button to set the age. Confirm with the SET button .
6. flashes on the display. Use the button to set the gender. Confirm with the SET button .
7. "Act3" flashes on the display. Use the button to set your activity level based on how much you exercise (considered over the long term). (Act1 = none, Act2 = low, Act3 = medium, Act4 = high, Act5 = very high/athletic). Confirm with the SET button .
8. "End" appears in the display. Confirm with the SET button . The scale user has been created successfully.
9. "0.0" and the user symbol appear on the display. Take the initial measurement.

Deleting users

You can delete individual scale users in the "beurer HealthManager Pro" app.
Alternatively, you can also delete scale users directly on the scale. To do so, proceed as follows:

1. Press and hold the SET button for 4 seconds. "unit" flashes on the display.
2. Press the SET button twice until "USEr" flashes on the display.
3. Use the button to select the scale user to be deleted. Confirm your selection with the SET button
4. Press the SET button repeatedly until "End" appears. Then press the button within 5 seconds.
5. "dEL" appears on the display. Confirm with the SET button . The scale user has now been deleted.

Changing the weight unit

You can change the weight unit either using the "beurer HealthManager Pro" app or directly on the scale

1. Press and hold the SET button for 4 seconds. "unit" appears on the display .
2. Use the button or button to select the desired weight unit (kg, lb or stlb). kg = kilograms, lb = pounds, stlb = stones
3. To confirm, press the SET button repeatedly until the display switches off.

Deactivating Bluetooth and WIFI

To deactivate Bluetooth and WIFI, proceed as follows:

1. Press and hold the SET button for 4 seconds.
2. Press the SET button repeatedly until "on" appears on the display 1.
3. Select "oFF" with the button or the button .
4. To confirm, press the SET button repeatedly until the display switches off.

Please note that the Bluetooth and WIFI function is then NO longer possible. To reactivate it, set it from "oFF" to "on".

WHAT IF THERE ARE PROBLEMS

Restarting the unit

If it is necessary to restart the scale (e.g. scale software freezes). Remove the batteries briefly.

Resetting the unit to factory settings

1. Press and hold the SET button for 4 seconds. "unit" flashes on the display.
2. Press the SET button three times until "SET" flashes on the display.
3. Press the button and confirm "rSt" using the SET button.

Updating the unit software

The app will inform you when a new software update is available.

1. Briefly press on the scale to switch it on.
2. Press and hold the button for 15 seconds. The scale automatically checks for an update and downloads it. This may take a few minutes. If the update is successful, "PASS" will be displayed.

If the scale is already up to date with the latest software version "utd" appears.

Messages and errors

Display	Cause/remedy
Discrepancy in weight	Incorrect zero point (e.g. in the event of a change of location or temperature fluctuation): briefly press on the scale until the current weight is displayed, then remove your foot so that "0.0" flashes.
	Scale is placed on carpet or uneven ground: the surface must be hard and level.
PAir	Bluetooth needs to be paired: start/allow pairing/bonding on your smartphone (note any messages in the status bar/notification bar), and confirm the 6-digit pairing code using the SET button on the device and on the smartphone.
"USE APP" or flashing	The scale can be connected to the app via Bluetooth: do not connect it via the Bluetooth settings on your smartphone, only via the app.
UnSt	This weight measurement was unstable: stand still during the measurement.
U: --	The scale was unable to assign the measurement to a scale user: if the automatic scale user detection function is not working, briefly press the scale with your foot, press the button repeatedly until your scale user is displayed, and wait 3 seconds. Weigh yourself again.
BF--	The body fat percentage is outside the measurable range (less than 5% or greater than 70%): check the user data or change the activity level.
	Diagnostic measurement cannot be taken (e.g. measurement attempted while wearing shoes): Repeat the measurement barefoot. Otherwise, only weight values will be displayed and transferred.
oLd	The maximum weight capacity of 180 kg has been exceeded: loads must not exceed 180 kg.
Lo	Batteries are flat. Replace the batteries.
Err1	Incorrect password for your selected WIFI network/SSID/router.
Err2	Your router does not have Internet access. The server cannot be reached.
Er3...	Software update failed: please try again.
Err4	Booting problems: Remove the batteries briefly.
utd	The software is up to date.
no	There is no WIFI connection to the server for the software update.

WIFI/Bluetooth connection problems

Problem	Cause/remedy
No Bluetooth connection Symbol is not displayed	Device is outside the Bluetooth range. The minimum range in the open is approx. 10 m. Walls and ceilings reduce the range. Other radio waves may interfere with the transmission. Therefore, do not position the scale near devices such as microwaves or induction hobs. Ideally, switch o other Bluetooth devices that are within range.
	No Bluetooth connection to the app. Press the SET button on the scale so that "USE APP" flashes in the scale display. Then use the "beurer HealthManager Pro" app. Switch Bluetooth on your smartphone o and on again. Ensure that the scale is not being connected via the Bluetooth settings of the operating system. If necessary, remove it from the device list in the Bluetooth settings and then use the "beurer Health-Manager Pro" app. Completely close the app (including in the background). Switch your smartphone o and on again. Briefly remove the batteries from the scale and reinsert them. Launch the app. When connecting the scale, check the status bar on the smartphone to start pairing/ bonding. Note: A Bluetooth connection is only required for initial use and changing the scale's settings. The measurements can also be transferred via Bluetooth, but in the normal standard application the measurement data will be transferred via WIFI (without Bluetooth).
No connection to server/cloud Symbol is not displayed	Check whether your router has an Internet connection. Check the device settings in the app.
No connection to the router Symbol is not displayed	Incorrect password Press the SET button on the scale. Scale displays "USE-APP". Open the app. Open the scale setting in the app. WIFI radio network/network name (SSID) of your Internet router and password (WIFI network key) must match. Re-enter password/network key. Ensure that the password/network key matches the one set on your selected router/WIFI name. Please remember that this is case sensitive. For further information, see technical data under "Connectivity".
	Incorrect router settings The device connects to 2.4 GHz. The device cannot connect to 5 GHz or 6 GHz. Check the router settings to see if 2.4 GHz is supported (mixed 2.4 GHz / 5 GHz operation is possible in principle). Do not use a mobile WIFI hotspot as it may not be permanently available. Avoid guest networks.
Measurements are not sent Symbol is not displayed	No WIFI/Bluetooth connection: Bluetooth symbol or WIFI and cloud symbols must be displayed after a measurement. If necessary, reduce the distance between the scale and the WIFI router. Check and test the device settings of the WIFI network in the "beurer HealthManager Pro" app. Check whether Bluetooth and WIFI have been deactivated on the scale.
	No measurement for the scale user: The user memory (e.g. U: 1) which appears on the scale display during a measurement must be assigned to the scale in your app settings. Only these measurements can be transferred. Therefore, when taking a measurement, check your user on the scale and in your app settings. If the automatic scale user detection function is not working, briefly press the scale with your foot, press the button repeatedly until your scale user is displayed, and wait 3 seconds. Then take the diagnostic measurement. At the end of the measurement, the symbol should appear on the scale display. The measurement is then transferred via Bluetooth or WIFI. If this is not the case, check the device settings in the app.

CLEANING AND MAINTENANCE

Clean the surface of the scale from time to time using a slightly damp cloth. Do not use the scale again until the surface is completely dry.

• Do not use any abrasive cleaning products.
• Never submerge the scale in water. Never rinse the scale under running water.
• Do not place any objects on the scale when it is not in use.
• Protect the scale from knocks, moisture, dust, chemicals, drastic changes in temperature and nearby sources of heat (ovens, heaters).

TECHNICAL DATA

Subject to technical changes.
*This product satisfies the requirements of the applicable European directives.

IMPORTANT SAFETY NOTES

• Intended use: the device is only intended for weighing humans and for recording your personal fitness data. The device is only intended for private use and not for medical or commercial purposes. The device must only be used for the purpose for which it was designed and in the manner specified in these instructions for use.
• The device may not be used by people with medical implants (e.g. pacemakers), as this may affect their functionality.
  
• Do not use the device during pregnancy.
• Danger of tipping! Never place the scale on an uneven surface (see Figure ). Never step onto the outer edge of the scale on just one side (see Figure ).
  
• Danger of slipping! Do not step onto the scale with wet feet (see Figure ). Do not step onto the scale when the surface is wet. Do not step onto the scale wearing socks.
• Please note that measuring tolerances are possible for technical reasons as this scale is not calibrated for use in a professional medical context.
• This scale works on the principle of B.I.A. (bioelectrical impedance analysis). When this measurement of the electrical resistance (impedance) is considered alongside constants and/or individual values (age, height, gender, activity level), the body fat percentage and other variables in the body can be calculated. Please note that the values calculated by the diagnostic bathroom scale only represent an approximation of the actual medical analytical values for the body. Only a specialist doctor can precisely establish the body fat, body water, muscle percentage and bone structure using medical methods (e.g. computer tomography).
• Obtain professional advice from appropriately qualified personnel (e.g. a doctor) when undertaking any treatment or diet to address being overweight or underweight. The health values determined using the scale can assist the qualified personnel in their diagnoses.
• Inaccurate or implausible results may occur when determining body fat in children, performance athletes or people with medical/physical limitations (e.g. oedema symptoms, osteoporosis, people who are taking cardiovascular medication or medication which changes the vascular system, people with major anatomical abnormalities on the legs).
• Repairs may only be carried out by Beurer Customer Services or authorised retailers. Never open the scale yourself.

Documents / Resources

References

• Beurer GmbH - Health and well-being
• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Beurer BF 880 (760.08) Manual