Beurer KS 54 Manual

Commissioning

Insert batteries or remove insulating strip (2 x AAA 1.5 V).

Place the scale on a secure, flat surface.

Switch on the scale.

Adjusting the unit.

Weighing

Switch on the scale.

Position the container.

Tare the scale.

Place the material to be weighed on the scale.

To weigh additional ingredients, tare again.

Automatic switch-off function.

Settings

Setting the timer
Briefly press TIMER.

Set the desired time using ▲ and ▼.
Press TIMER to confirm and to start.

It will beep at the end.
Press TIMER to switch off the beeps.

Error messages

Empty battery.

Maximum weighing capacity exceeded (5 kg).

Important instructions

Read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain.

SIGNS AND SYMBOLS
The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for the device:

	Manufacturer
	Marking to identify the packaging material. A = Material code, B = Material number: 1-7 = Plastics, 20-22 = Paper and cardboard

• Max. capacity 5 kg (11 lb), graduation 1 g (0.1 oz).
• Protect your scale from impact with hard objects, moisture, dust, chemicals, toiletries, liquid cosmetics, great temperature fluctuation and closeness to sources of heat (open fires, radiators).
• Cleaning: You can clean the scale with a damp cloth and a little washing up liquid, if required. Never immerse the scale in water or rinse it under running water.
• Strong electromagnetic fields (e.g. cell phones) may impair the accuracy of the scale.
• The scale is not intended to be used for commercial purposes.
• Repairs may only be performed by Beurer customer service or by accredited retailers.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Beurer KS 54 Manual