Cleaning Spray Arms; Troubleshooting - Siemens SN61HX02TG Information For Use

17.6 Cleaning spray arms
Limescale and soiling in the dish-
washing water may block the nozzles
and bearings on the spray arms.
Clean the spray arms regularly.
Unscrew the upper spray arm
1.
and pull down to remove
18 Troubleshooting

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
Tip: You can find further information and explanations on troubleshooting on-
line by scanning the QR code on the title page and on our website siemens-
home.bsh-group.com.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
staff.
Only use genuine spare parts when repairing the appliance.
If the power cord or the appliance power cable of this appliance is damaged,
it must be replaced with a special power cord or special appliance power
cable, which is available from the manufacturer or its Customer Service.
Fault
Display for water sup-
ply lights up
.
Cause and troubleshooting
Supply hose is kinked.
Install the inlet hose without kinks.
Pull up the lower spray arm to re-
2.
move.
Check the outlet nozzles on the
3.
spray arms for blockages under
running water and remove any for-
eign objects.
Insert the lower spray arm.
4.
The spray arm clicks into position.
Insert the upper spray arm and
5.
screw it firmly in place.
Troubleshooting en
39