Siemens SN61HX02TG Information For Use
Siemens SN61HX02TG Information For Use

Siemens SN61HX02TG Information For Use

Table of Contents

Advertisement

Quick Links

SN61HX02TG
Dishwasher
EN Information for Use
Register your appliance on My Siemens and
discover exclusive services and offers.
Siemens Home Appliances

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SN61HX02TG and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Siemens SN61HX02TG

  • Page 1 SN61HX02TG Dishwasher EN Information for Use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
  • Page 2: Table Of Contents

    en Table of contents You can find additional information and explanations online. Scan the QR code on the title page. Table of contents Table of contents 1 Safety⁠ ⁠ ..........⁠ ⁠ 3 8.5 Folding prongs⁠ ⁠ ......⁠ ⁠ 2 0 1.1 General information⁠...
  • Page 3: Safety

    Safety en  1 14.4 Setting timer programming 18 Troubleshooting⁠ ⁠ ...... ⁠ ⁠ 3 9 ⁠ ⁠ ...........⁠ ⁠ 3 0 18.1 Clean wastewater pump⁠ ⁠ ..⁠ ⁠ 4 4 14.5 Starting the programme⁠ ⁠ ..⁠ ⁠ 3 0 19 Transportation, storage and 14.6 Interrupting programme⁠...
  • Page 4: Restriction On User Group

    en Safety ¡ in closed rooms in the home and with similar applications, e.g.: in canteens in shops, offices and other work environments; in agricultural businesses; use by customers in hotels, motels and other typical home environments; in bed and breakfasts. ¡...
  • Page 5 Safety en isolating switch must be integrated into the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged. Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous. Never immerse the plastic housing in water.
  • Page 6: Safe Use

    en Safety 1.5 Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause seri- ous harm to health. Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products.
  • Page 7: Damaged Appliance

    Safety en Never expose the appliance to intense heat or humidity. Do not use steam- or high-pressure cleaners to clean the appli- ance. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources.
  • Page 8 en Safety Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts. Children may become trapped in the appliance and suffocate. Use the childproof lock if fitted. Never let children play with or operate the appliance.
  • Page 9: Preventing Material Damage

    Preventing material damage en Modified or damaged water hoses 2 Preventing material may result in material damage and Preventing material damage damage damage to the appliance. Never kink, crush, modify or cut 2.1 Safe installation through water hoses. Only use the water hoses supplied ATTENTION with the appliance or genuine Improper installation of the appliance...
  • Page 10: Environmental Protection And Saving Energy

    en Environmental protection and saving energy So as not to scratch the finish on 4 Installation and con- the appliance, do not use sponges Installation and connection nection with a rough surface or abrasive cleaning agents. To ensure proper operation, connect To prevent corrosion, do not use the appliance to the power and water sponge cloths on dishwashers with supply correctly.
  • Page 11: Drainage Connection

    Installation and connection en Check the Scope of supply and Installing the drinking water con- the condition of the appliance. nection Consult the installation instructions Note: If you are replacing the appli- for the installation dimensions re- ance, you must use a new water sup- quired.
  • Page 12: Familiarising Yourself With Your Appliance

    en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. Rating plate with E number and FD number Page 46 .   Rating plate The data you need for Customer Service Page 46 .
  • Page 13: Controls

    Familiarising yourself with your appliance en Add the special salt to the dispenser for Dispenser for special salt special salt.  "Water softening system", Page 21 The lower spray arm washes the tableware in the bottom basket. Lower spray arm If the tableware has not been washed prop- erly, clean the spray arms.
  • Page 14 en Familiarising yourself with your appliance With some buttons you can perform different functions. 4 5 6 7 8 9 Page 30 Switching on the appliance   Page 31 ON/OFF button and reset Switching off the appliance   button Terminating the programme Page 31  ...
  • Page 15: Programmes

    Programmes en The programme sequence display Programme sequence display shows the current cycle of the appli- ance, e.g. washing. Water softening system Special salt refill indicator  "Adding special salt", Page 23 Rinse aid system Rinse aid refill indicator  "Adding rinse aid", Page 24  1 Symbols on the display Symbol...
  • Page 16 en Programmes The running time may vary depending on the programme selected. The running time depends on the water temperature, the quantity of tableware, the level of Page 17 selected. The running time and soiling and the Additional function   energy consumption will increase if the rinse aid system is switched off or if rinse aid needs to be added.
  • Page 17: Information For Test Institutes

    Additional functions en 6.1 Information for test insti- Save the programme via the Home Connect app. tutes The pre-rinse program is saved to Test institutes are provided with in- this button at the factory. Pre-rinse is formation for comparability tests, e.g. suitable for all types of tableware. according to EN60436.
  • Page 18: Features

    en Features Symbol Additional func- tion IntensiveZone Switch on with mixed loads containing table- ware with different soiling levels, e.g. place very soiled pots and pans in the bottom bas- ket and normally soiled tableware in the top basket. The spray pressure in the bottom basket is increased and the maximum programme temperature maintained longer.
  • Page 19: Knife Shelf

    Features en Adjusting top basket with pairs of 8.2 Knife shelf rollers Use the shelf for knives and long To wash large items of tableware in items of cutlery. the baskets, adjust the shelf position of the top basket. Pull out the top basket. Remove the basket.
  • Page 20: Bottom Basket

    en Features 8.4 Bottom basket 8.5 Folding prongs Arrange pans and plates in the bot- Use the folding prongs to position tom basket. tableware securely, e.g. plates.  1 Cutlery basket You can fold the prongs down to po- sition pans, bowls and glasses Large plates up to a diameter of better.
  • Page 21: Cutlery Basket

    Before using for the first time en 8.6 Cutlery basket Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards. 8.7 Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery basket Level Top basket Bottom basket Page 20...
  • Page 22: Overview Of Water Hardness

    en Water softening system To ensure good dishwashing results, To avoid damage to the appliance, you can treat the water with special water with a hardness above 9 °E salt and the water softening system. must be softened. 10.1 Overview of water hardness settings You can find an overview of the water hardness values that can be selected here.
  • Page 23: Switching Off The Water

    Water softening system en Adding special salt penser is displaced and forced out. If the special salt refill indicator lights Place the lid back on the dis- up, add special salt to the dispenser penser and turn to close. for special salt just before the pro- gramme starts.
  • Page 24: Regeneration Of The Water

    en Rinse aid system water softening system to the right 11 Rinse aid system water hardness again. Rinse aid system  "Setting the water softening sys- 11.1 Rinse aid tem", Page 22 For optimum drying results, use rinse 10.5 Regeneration of the water aid. Only use rinse aid for domestic dish- softening system washers.
  • Page 25: Switching The Rinse Aid Sys

    Detergent en 11.2 Setting the amount of will generally get better results using rinse aid. rinse aid Press . If there are streaks or water marks on To open the appliance settings, tableware, change the amount of press for 3 seconds. rinse aid. flashes.
  • Page 26: Unsuitable Detergents

    en Detergent Tip: Suitable detergents are available ance, please additionally use Special Page 22 and Rinse aid online via our website or from Cus- salt   Page 46 . Page 24 . tomer Service     Tabs Combined detergent Tabs are suitable for all cleaning Besides conventional separate deter- functions and do not need to be gents, a number of products are...
  • Page 27: Adding Detergent

    Detergent en Detergents marked as "organic" or Add the detergent to the dry deter- "ecological" (environmentally gent dispenser. friendly) generally contain lower levels of active agents or com- pletely dispense with certain sub- stances. The cleaning effect may be restricted here. Set the rinse aid and the water softening system to the separate detergent or combined detergent...
  • Page 28: Tableware

    en Tableware the right dosage. In order to en- 13 Tableware sure that tablets can dissolve Tableware evenly, do not place any other ob- Only clean tableware that is suitable jects in the tablet collecting tray. for dishwashers. Tip: If you use powder detergent and Note: Decorated glassware and parts select a program with pre-rinse, you made of aluminium or silver may...
  • Page 29: Removing Tableware

    Tableware en cape and water to leak out around Remove large remnants of food the door. This could damage your kit- from tableware. chen units. To save resources, do not pre- rinse tableware under running wa- ter. Observe the following when arran- ging tableware: Put heavily soiled tableware in –...
  • Page 30: Basic Operation

    en Basic operation to shock, may crack and can result in Press the programme button re- injury. peatedly until the right programme When the programme has ended, has been selected. do not empty the appliance until The programme is set and the the tableware has cooled down for LED flashes.
  • Page 31: Interrupting Programme

    Basic settings en appliance is installed at eye level Open the appliance door carefully. with the cabinet front fitted flush. Press . The programme has ended when The programme is saved and the no LEDs on the controls are lit. appliance switches off. The programme has ended when Press to resume the pro-...
  • Page 32 en Basic settings Basic setting Selection Description Extra Dry Switch Extra Dry on or off  1 for each operation. For a better drying result the temperature in the fi- nal rinse is increased. This may increase the running time slightly. Note: Please take care with delicate tableware.
  • Page 33 Basic settings en Basic setting Selection Description The settings for initial start-up must be con- figured.  "Restoring factory set- tings", Page 34 Setting Extra Dry Press repeatedly until the right signal volume has been set. Press . To open the appliance settings, press for 3 seconds.
  • Page 34: Home Connect

    en Home Connect Activating Remote Start 16 Home Connect Press . Home Connect This appliance is network-capable. To open the appliance settings, Connect your appliance to a mobile press for 3 seconds. device to control its functions via the flashes. Home Connect app. Press repeatedly until The Home Connect services are not flashes.
  • Page 35: Remote Start

    Home Connect en  1 Scan the following QR code. 16.3 Smart Start Smart Start automatically determines the optimal time for the programme to start. You can use the Home Connect app to activate or deactivate the function. Activating Smart Start Requirements You can install the Home Connect Smart Start is activated via the app and connect your appliance Home Connect app.
  • Page 36: Cleaning And Servicing

    Tip: You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online at https://www.siemens-home.bsh-group.com/ store or from customer service. Machine Care is a programme which removes various deposits in one washing...
  • Page 37: Filter System

    Cleaning and servicing en Phase Removal of Detergent Placement Grease and limes- Liquid machine care Appliance interior, e.g. cale product or machine bottle hung in the cut- descaler in powder lery basket or powder form. in the interior. Food remnants and Machine cleaner Detergent dispenser deposits...
  • Page 38 en Cleaning and servicing Press the locking catches Micro filter gether and lift the coarse filter out Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system Check that no foreign objects Clean the filter elements under run-...
  • Page 39: Cleaning Spray Arms

    This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code on the title page and on our website siemens- home.bsh-group.com. WARNING Risk of electric shock! Improper repairs are dangerous.
  • Page 40 en Troubleshooting Fault Cause and troubleshooting Display for water sup- Water tap is turned off. ply lights up Turn on the water tap. Water tap is jammed or furred up. Turn on the water tap. The filters in the water connection of the supply or AquaStop hose are blocked.
  • Page 41 Troubleshooting en Fault Cause and troubleshooting Display for water sup- Not an appliance fault. Wastewater pump is blocked or ply lights up the cover of the wastewater pump is loose. Clean the wastewater pump.  "Clean wastewater pump", Page 44 Secure the cover of the wastewater pump so it clicks into position.
  • Page 42 en Troubleshooting Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds.  "Controls", Page 13 The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. Pull out the mains plug or switch off the fuse in the fuse box.
  • Page 43 Troubleshooting en Fault Cause and troubleshooting Remnants of food on Filters are inserted incorrectly and/or not engaged. tableware. Insert the filters properly.  "Filter system", Page 37 Engage the filters. Washing programme selected too weak. Select a more intensive washing programme.  "Programmes", Page 15 Tableware has been precleaned too intensely.
  • Page 44: Clean Wastewater Pump

    en Troubleshooting Fault Cause and troubleshooting Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected. Use rust-resistant tableware. Cutlery may also rust if washed together with rusting items. Do not wash rusting items. Salt content in washing water is too high. Remove any spilled special salt from the tub.
  • Page 45: Transportation, Storage And Disposal

    Transportation, storage and disposal en Insert the pump cover and press 19.3 Transporting the appli- down ance To avoid damage to the appliance, empty it before transporting. Note: Always transport the appliance upright to prevent residual water get- ting into the machine's controls and damaging the appliance.
  • Page 46: Customer Service

    en Customer Service Unplug the appliance from the Nr.), the production number (FD) and mains. the consecutive numbering (Z-Nr.) of Cut through the power cord. your appliance. Dispose of the appliance in an en- You can find the contact details for vironmentally friendly manner.
  • Page 47: Technical Specifications

    Technical specifications en to our instructions; this also in- If your appliance is fitted with cludes correctly fitting the Aqua- Aqua-Stop, you can in principle Stop extension (genuine access- leave your appliance unattended ory). Our guarantee does not cover during operation and the tap defective supply lines or fittings up turned on afterwards.
  • Page 48: Statement Of Compliance For Great Britain

    BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provi- sions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at siemens- home.bsh-group.com among the additional documents on the product page for your appliance.
  • Page 49 Declaration of Conformity en group is seen on the title page. The The manufacturer, BSH Hausgeräte full model identifier is made up of the GmbH deems that it has complied characters before the slash in the with product number (E no.) which can be provision 5.1-1 of ETSI EN 303 found on the rating plate.
  • Page 52 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...

Table of Contents