Download
Share
Print this page
Alarm.Com ADC-VDB750 Installation Manual
  1. Manuals
  2. Brands
  3. Alarm.Com Manuals
  4. Intercom System
  5. ADC-VDB750
  6. Installation manual
Alarm.Com ADC-VDB750 Installation Manual

Alarm.Com ADC-VDB750 Installation Manual

Video doorbell
Hide thumbs

Advertisement

Quick Links

Download this manual
Alarm.com Video Doorbell (ADC-VDB750) - Installation Guide
Use this guide to assist with the installation of the ADC-VDB750 at a long-term rental unit.
Pre-installation checklist
• ADC-VDB750 with included accessories:
◦ Reference card with a MAC address (also printed on the back of the doorbell). You will need to keep a record
of this to share with the property manager post-installation.
◦ Optional wedge-mount
Important: You will need to keep a record of this to share with the property manager post-installation.
• Wired doorbell transformer (recommended 16VAC 10VA) or power supply (minimum 15VDC 8W); specifications are
often written directly on the power source
• Wi-Fi (2.4 or 5 GHz) connection to broadband Internet (Cable, DSL, or Fiber Optic)
• A computer, tablet, or smartphone with Wi-Fi is required if the router does not have the Wi-Fi Protected Setup
(WPS) feature
https://answers.alarm.com/PC/Installation_Support/Video/Alarm.com_Video_Doorbell_(ADC-VDB750)/Alarm.com_Video_Doo...
Updated: Tue, 10 Dec 2024 18:42:15 GMT
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ADC-VDB750 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alarm.Com ADC-VDB750

Summary of Contents for Alarm.Com ADC-VDB750

  • Page 1 Alarm.com Video Doorbell (ADC-VDB750) - Installation Guide Use this guide to assist with the installation of the ADC-VDB750 at a long-term rental unit. Pre-installation checklist • ADC-VDB750 with included accessories: ◦ Reference card with a MAC address (also printed on the back of the doorbell). You will need to keep a record of this to share with the property manager post-installation.

  • Page 2: Optional Accessories

    Optional accessories • Wired compatible mechanical or digital chime • ADC-VDB750 Power Module (sold separately as ADC-VDBA-PM-750; only required if wired to a digital chime) • ADC-VDB750 Backplate Adapter (sold separately as ADC-VDBA-750-BPA; can be used if replacing a Slim Line Doorbell Camera and it is preferred to not reconnect the wiring) https://answers.alarm.com/PC/Installation_Support/Video/Alarm.com_Video_Doorbell_(ADC-VDB750)/Alarm.com_Video_Doo…...
  • Page 3 • ADC-VDB750 Wedge Mount Kit (sold separately as ADC-VDBA-750-WMK; can be used to optimize the captured field of view) In the box • ADC-VDB750 video doorbell • ADC-VDB750 wallplate (with pre-assembled set screw and wire terminal screws) • Wall anchors (x2) & ST3.5 x 22mm screws (x2) •...
  • Page 4 3. Verify that the chime wire terminals are connected to one wire run from the transformer and one wire run from the doorbell. ◦ If the in-home chime is digital (rather than mechanical), connect the ADC-VDB750 Power Module (sold separately as ADC-VDBA-PM-750) to the chime by connecting one wire to each of the terminals (leaving the existing wires in place, polarity does not matter).
  • Page 5 5. If using an optional wedge, thread the wires at the doorbell through the center of the wedge and mount the wedge to the surface with the provided screws/anchors. https://answers.alarm.com/PC/Installation_Support/Video/Alarm.com_Video_Doorbell_(ADC-VDB750)/Alarm.com_Video_Doo… Updated: Tue, 10 Dec 2024 18:42:15 GMT...
  • Page 6 Important: Minimize the length of excess wire leads protruding from the area surrounding the screw terminals. Excess wire can interfere with the assembly to the ADC-VDB750 and may result in the device not powering on.
  • Page 7 Important: If using an optional wedge-mount, please keep record of this to share with the property manager post-installation. ◦ If not using an optional wedge, mount the wallplate to the surface with the provided screws/anchors. https://answers.alarm.com/PC/Installation_Support/Video/Alarm.com_Video_Doorbell_(ADC-VDB750)/Alarm.com_Video_Doo… Updated: Tue, 10 Dec 2024 18:42:15 GMT...
  • Page 8 8. Connect ADC-VDB750 device to wallplate by first securing/latching the top edge, then pushing the device into the wallplate, and lastly securing the bottom set screw with a screwdriver. 9. Restore power to the doorbell circuit (transformer). Important: Make sure to provide a record of the MAC address, wedge (if used), and chime type for the unit to the property manager.
  • Page 9 Physical installation (Slim Line I/II replacement) Note: This optional procedure is optimized for easy replacement of Slim Line (I/II) models with an ADC-VDB750 using the original Slim Line wallplate and ADC-VDB750 Backplate Adapter (ADC-VDBA-750-BPA), eliminating the need to rewire. The use of optional wedges is not supported with this method.
  • Page 10 4. Keep the wallplate installed, verifying that the wiring is connected well to the two screw terminals and ensuring that the bottom set screw is loosened sufficiently to not be protruding at all above the threads at the bottom of the wallplate. https://answers.alarm.com/PC/Installation_Support/Video/Alarm.com_Video_Doorbell_(ADC-VDB750)/Alarm.com_Video_Doo… Updated: Tue, 10 Dec 2024 18:42:15 GMT...
  • Page 11 5. Secure the ADC-VDB750 device to the ADC-VDB750 Backplate Adapter and secure at the bottom of the adapter with the provided set screw. 6. Connect the Mounting Adapter (with ADC-VDB750 device attached) to the existing Slim Line wallplate by latching the top edge, then pushing the device into the wallplate, and then securing the original bottom set screw.
  • Page 12 2. On an Internet-enabled device, connect to the Wi-Fi network ADC-VDB750 (XX:XX:XX) where XX:XX:XX is the last six characters of the ADC-VDB750’s MAC address, which is located on the device or on the packaging. 3. Once connected, on the same device, open a web browser and enter http://vdb750install.com...
  • Page 13 No local or Internet connection Blinking red Power on, camera booting Alternating red and green Camera resetting to factory default (press and hold button for 45-50 seconds) Solid green Connected to PointCentral https://answers.alarm.com/PC/Installation_Support/Video/Alarm.com_Video_Doorbell_(ADC-VDB750)/Alarm.com_Video_Doo… Updated: Tue, 10 Dec 2024 18:42:15 GMT...
  • Page 14 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. https://answers.alarm.com/PC/Installation_Support/Video/Alarm.com_Video_Doorbell_(ADC-VDB750)/Alarm.com_Video_Doo… Updated: Tue, 10 Dec 2024 18:42:15 GMT...
  • Page 15 Cet appareil doit être installé et utilisé à une distance minimale de 20 centimètres entre l’appareil et votre corps. Cet appareil et son ou ses antennes ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur. https://answers.alarm.com/PC/Installation_Support/Video/Alarm.com_Video_Doorbell_(ADC-VDB750)/Alarm.com_Video_Doo… Updated: Tue, 10 Dec 2024 18:42:15 GMT...