Trailer Valet MV PRO Quick Start Manual

Check that you have all your
parts and accessories.
SPANNER WRENCH
DRILL ATTACHMENT
MV PRO UNIT
BALL CONVERTER COUPLING PLATE
2" HITCH BALL
HAND CRANK
1.
Check trailer height and raise
the trailer tongue to where the
frame is about 16 inches off
the ground to give adequate
space to attach the dolly.
ROTATION PIN
4.
Using your trailer jack, lower the
hitch towards the unit's rotating
coupler and attach rotation pin
BALL BASE
to secure.
IMPORTANT SAFETY INFORMATION
For information and assistance, please visit our support page at TrailerValet.com or give us a call at (844) 846-9344.
Scan the QR code to the right for detailed safety and usage information.
MANUAL
TRAILER VALET MV PRO
Quick Start Guide
16"
2.
Set up hitch ball and ball base.
Then attach to coupler.
Optional: For 2-5/16" couplers,
attach ball converter to hitch ball.
5.
Make sure the MV Pro is
securely tightened and not
rocking.
3.
LOCKED
6.
Rev 7.01.24
Use spanner wrench and tighten
that base firmly!
Align and insert the drill adapter to
the drill adapter driveshaft. Lift the
steering handle to disengage
brakes, and start moving!