Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Trailer Valet XL
Summary of Contents for Trailer Valet XL
- Page 1 More information https://www.caravansplus.com.au...
- Page 2 Trailer Valet. Failure to follow these guidelines may result in serious injury to persons and property for which Trailer Valet will not be held liable. Do not allow persons to operate or assemble this trailer dolly until they have read this manual and have developed a thorough understanding of how the trailer dolly works.
- Page 3 Hitching, unhitching, and moving is now done with precision. The Trailer Valet XL is designed for trailers up to 10,000 lbs. The Trailer Valet is for use only on paved surfaces or compacted gravel and soils that are free of debris.
- Page 4 DO NOT use the Trailer Valet on slopes This product must be installed and used and inclines beyond stated limits. in strict accordance with these instructions. DO NOT attempt to use the Trailer Valet to pull up (nose first) or to push down Always remember to set the brakes (rear first) an incline.
- Page 5 Upon removing items from packaging, it is very important to thoroughly inspect all parts of the system before using the device. Any part that is missing or damaged must be immediately replaced. Contact Trailer Valet Customer Service at 1-844-846-9344 or Support@TrailerValet.com What’s in the Box: A.
- Page 6 Locking Nut. I. Before installing the Ball Attachment into Secure tightly. the Rotating Coupler of the XL, put the ball into the trailer coupler and lock the ball with the coupler latch. II. Using the Tightening Tool, turn the Locking Nut counter clockwise until the nut is secured flat against the coupler.
-
Page 7: Step 4: Testing The Assembly
Knowing the proper techniques to operate your Trailer Valet can help keep you and others around you safe. In this guide, you are shown the basic fundamentals for effective operations. However, it is up to you to analyze the situation and make the decisions necessary for the proper use of your Trailer Valet. -
Page 8: Step 6: Operating The Device
DO NOT pull up or push down an incline. The unit must always be on the lower end of any incline. If you have any questions concerning the use of your Trailer Valet on a slope or incline, please contact us at (844) 846-9344 or email us at: support@trailervalet.com NOTE: Use of power drill is inadvisable for movement upon any incline. - Page 9 REPLACEMENT OF EQUIPMENT AND PROPERTY. Customer Responsibilities: Customers may be required to provide proof of purchase date, respond to questions designed to assist with diagnosing potential issues, and follow Trailer Valet’s directions to make a claim on your warranty. To make a warranty claim:...
- Page 10 Apply multipurpose grease to the gear bushings. Additional Tips: The Trailer Valet is made of high strength steel and given a powder coat finish made to resist corrosion. However, if the device is used in a marine environment or where road salt is encountered, rinse off the interior and exterior with fresh water and allow to dry.
- Page 11 More information https://www.caravansplus.com.au...
- Page 12 Copyright 2017 by Supertech S. Corporation. All right reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Supertech S. Corporation. For further information or if you have any questions, please contact: SUPERTECH S.
Need help?
Do you have a question about the XL and is the answer not in the manual?
Questions and answers