Plantronics Blackwire C510 Quick Setup Manual

Blackwire C510
®
Welcome:
Using a Plantronics Blackwire headset for PC
calls will deliver a simpler, more comfortable
and better sounding audio experience than
you could get using just your computer's
internal microphone and speaker.
*This picture shows the
Stereo (C520) version
C
A B
Control Functions:

A. Mute microphone

B. Volume adjust

C. Call answer/end

Blackwire C510/C520 Key Features:

Manages PC calls with Smart Sensor™
convenience

One-touch call answer/end, vol +/-, and mute

Inline indicator lights and user friendly audio
tones alert the user to connection, mute and
volume status

PC wideband audio with noise-canceling
microphones for the best audio quality on calls

Take it on the go, with folding ear cushions and
included carrying case

Monaural (C510), Stereo (C520)
/C520 Quick Setup Guide
™ ™
Getting started:
Follow the steps below to get call answer/end controls
with your Blackwire headset and Cisco® Unified
Communications Integration for Microsoft® Lync®.
1. Connect your headset to the computer. If this is
the first time you are connecting, wait for the
installation process to complete.
2. To get call control features, please download
the latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing software
on your computer.
Configuring Cisco Unified Communications Integration
for Microsoft Lync to always route call audio to the
headset:
3. In the Cisco window, click the Settings button.
4. Then in the Cisco UC Options window, select
Audio.
5. Next select your Plantronics headset as the
default device for both Microphone and
Speakers.
6. Now you can select which device plays your
incoming call alerts by selecting an option for
Ringtone. These sounds typically route through
your PC speakers, but can come through your
Plantronics headset if you prefer.
7. In this screen you can also adjust Speakers and
Ringtone volume levels.
8. When you are finished, click OK.
Note: USB configuration settings are unique for each USB port.
If you connect the headset to a different port you will need to
make these changes again to set behavior for that USB port.
3
4
8
5
5
6