Plantronics Blackwire C510-M Quick Setup Manual

Blackwire C510-M/C520-M
®
Welcome:
Using a Plantronics Blackwire headset
for PC calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer's internal microphone
and speaker.
*This picture shows the
Stereo (C520-M) version
C
A B
Control Functions:

A. Mute microphone

B. Volume adjust

C. Call answer/end

Blackwire C510-M/C520-M Key Features:

Manages PC calls with Smart Sensor™
convenience

One-touch call answer/end, vol +/-, and mute

Inline indicator lights and user friendly audio
tones alert the user to connection, mute and
volume status

PC wideband audio with noise-canceling
microphones for the best audio quality on calls

Take it on the go, with folding ear cushions
and included carrying case

Monaural (C510-M), Stereo (C520-M)
Quick Setup Guide
™
Getting started:
The Plantronics Blackwire headset is ready
to use with your computer and Microsoft®
Lync® 2013.
1. Connect your headset to the
computer. If this is the first time
you are connecting, wait for the
installation process to complete.
Restart the computer if directed to
do so.
Configuring Microsoft Lync 2013 to always
route call audio to the headset:
2. Click on the Options button in the
main Microsoft Lync window.
3. Select the Audio Device option.
4. Choose your Plantronics headset
for Audio Device.
5. Check the Also Ring box for
Secondary Ringer and choose your
PC speakers from the drop down
menu if you would like them to ring
for incoming calls.
6. In this screen you can also test and
adjust volumes.
7. Click Ok when finished.
Note: USB configuration settings are unique
for each USB port. If you connect the
headset to a different port you will need to
make these changes again to set behavior
for that USB port.
3
5
7
2
4
5