Contents Package Contents ................Product Features ................Wearing Your Headset ..............Powering Your Headset and USB Bluetooth Adapter ..............Headset Indicator Lights and Alerts ..........Headset Indicator Lights ............6 Headset Alerts ................. 6 USB Bluetooth Adapter Indicator Lights ......... Pairing Your Headset with the USB Bluetooth Adapter ..............
Wearing Your Headset Your headset can be worn on your left or right ear. To switch from one ear to the other, fl ip the ear loop to the side, and twist around. The ear tip should fi t Point the mouthpiece toward comfortably in the opening your mouth of your ear canal...
Powering Your Headset and USB Bluetooth Adapter The headset automatically powers up when it is charging. Powering up: Press and hold Headset button for 2 seconds. 4 ascending beeps will sound when powered on. Powering down: Press and hold Headset button for 4 seconds. 4 descending beeps will sound when powered off.
Charging Your Headset Before using, you must fi rst charge your headset. The indicator light glows solid red while charging and turns solid blue when the headset is fully charged. Charge the headset for a minimum of 2 hours. Battery talk time is up to 8 hours. NOTE Do not use headset while charging and do not connect the charger while headset is in use.
Headset Indicator Lights and Alerts Headset Indicator Lights Action Button Action Sounds Indicator Lights Turn Press and hold 4 ascending Flashes blue every headset on for 2 seconds beeps 10 seconds Turn Press and hold 4 descending headset off for 4 seconds beeps Turn Press for...
USB Bluetooth Adapter Indicator Lights Action Indicator Lights Disconnected from the headset No LED Connected to the headset Solid blue Radio link active Flashes blue Pairing mode Flashes blue rapidly Pairing Your Headset with the USB Bluetooth Adapter NOTE The Bluetooth USB adapter comes pre-paired to the headset; however, if you fi...
3. Press OK. Using Your Headset with Dragon NaturallySpeaking 1. First, plug the USB adapter of the Calisto microphone into your PC, and make sure your headset is charged, paired with the adapter, and powered on. Then start Dragon. 2. You can now create a new user profi le within Dragon to use this microphone.
Page 11
NOTE If the Plantronics BT Adapter isn’t displayed in step 4 or if you are prompted to run audio training when you’ve already done it before, you may need to unplug and replug the USB Bluetooth adapter.
When creating a new user profi le within Dragon Dictate for your headset, note the following: 1. First, plug the USB adapter of the Calisto microphone into your Mac, and make sure your headset is charged, paired with the adapter, and powered on.
Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit www.plantronics.com for more information. Industry Canada Notice This Class B digital apparatus complies with Canadian ICES-003.
Need help?
Do you have a question about the Calisto and is the answer not in the manual?
Questions and answers