Focusing; When The Subject Is Not In Focus; Preventing Jitter (Camera Shake) - Panasonic Lumix DMC-G1 Operating Instructions Manual

Basic
Align the subject to the screen, and then press the shutter button halfway.
A Focus indication
B AF area (normal)
C AF area (when using the digital zoom or when it is dark)
D Aperture value
E Shutter speed
F ISO sensitivity
¢
It will flash in red when appropriate exposure is not achieved.
(Except when flash is activated)
•
When the AF mode is set to [
AF areas that have turned on are focused. If you would like to take a picture focused to certain
area, switch the AF mode to [Ø]. (P69)
If the subject is not in the center of composition when the AF mode is set to [Ø], it is
possible to move the AF area.
∫ Take picture with different focus modes depending on the subject (P69)
∫ Subjects and recording conditions which are difficult to focus
•
Fast-moving subjects, extremely bright subjects or subjects without contrast
•
When recording subjects through windows or near shiny objects
•
When it is dark or when jitter occurs
•
When the camera is too close to the subject or when taking a picture of both distant and near
subjects
When the jitter alert [
(P68) or the remote shutter (DMW-RSL1; optional)
•
Shutter speed will be slower particularly in the following cases. Keep the camera still from the
moment the shutter button is pressed until the picture appears on the screen. We recommend
using a tripod.
–
Slow sync.
–
Slow sync./Red-eye reduction
– [NIGHT PORTRAIT] and [NIGHT SCENERY] in the advanced scene mode (P88)
–
In [PARTY] in scene mode (P92)
–
When you set to a slow shutter speed
46
VQT1U32
Focus
Focus indication
AF area
Sound
¢
¢
], and multiple AF areas (up to 23 areas) have turned on, all the

When the subject is not in focus

(P71)

Preventing jitter (camera shake)

] appears, use [STABILIZER] (P100), a tripod, the self-timer

Focusing

When the subject is
focused
On
Green
Beeps 2 times
.
(P131)
When the subject
is not focused
Blinks
—
—