Pipe Element - Delta Electronics A10 User Manual

Chapter 3 Element Function|ScrEdit Software User Manual
3.5

Pipe Element

Property Description of Pipe (1) / Pipe (2) Element
HMI reads the value of the corresponding address (register). Then, convert the value to Pipe (1) / Pipe (2)
element and then display it on the screen.
Read Address
Text / Text Size
Font / Text Color
WaterMark Color
Inside Tube Color
Style
Detail Setup
3-24
Fig. 3.5.1 Pipe element options
Table 3.5.1 Property Description of Pipe Element
The address can be internal memory or the controller address. (Please refer to Table
3.2.2 Property Description of General Buttons.)
The user can set the text, text size, font and text color that provided by Windows®
to determine the text display on the element. (Please refer to Table 3.2.2 Property
Description of General Buttons.)
It is used to set the watermark color and inside tube color of Pipe (1) and Pipe (2)
element.
Pipe (1) Element
The watermark color is in blue.
The inside tube color is in black.
Standard
Pipe (2) Element
The watermark color is in red.
The inside tube color is in white.
Rotation 180
Data There are 16bits Word and 32bits
Length Double Word two options.
Data There are following data format
Format provided:
Word/Double Word
1. BCD
2. Signed BCD
3. Signed Decimal
4. Unsigned Decimal
5. Hex
Revision Apr. 30th, 2007, 2007PDD23000002