Lancaster Virelli Series Assembly Instructions

Virelli Series
Standard Height Table
A S S E M B LY I N S T R U C T I O N S
PA R T S
Table Top (1)
A
Table Legs (4)
B
S T E P 1
Place table top (A) upside down
on a clean, flat surface.
S T E P 2
Position two spacers (D) between
each corner bracket & the inner
frame corners. Insert two bolts
(C) with washers (E) into each
spacer on the inner side of the
frame as shown.
V I R E L L I S E R I E S S TA N D A R D H E I G H T TA B L E • A S S E M B LY I N S T R U C T I O N S
H A R D WA R E
M8X50 Bolt (8)
C E
25mm Spacer (8)
D F
D
E
C
N O T E S
• Inspect all pieces for
Washer (8)
damage before assembly.
• Do not assemble if
any pieces are broken
or damaged.
• Ensure you have all
required pieces before
assembly.
5mm Allen Key (1)
W W W . L A N C A S T E R TA B L E A N D S E A T I N G . C O M