Lancaster Spokeback Chair Assembly Instructions

Spokeback Chair
A S S E M B LY I N S T R U C T I O N S

REQUIRED TOOLS:

• Screwdriver

CONTENTS:

Frame 1/PC
A

NOTES:

1. Inspect all pieces for damage before assembly. Do not assemble if any pieces are broken or damaged. Ensure you have all
required pieces before assembly.
2. Power drill is optional for assembly.
3. There are two options for assembly, please reference both steps for your preference.
S T E P 1
Option 1: Place the chair frame (A) on its back.
Center cushion (B) on the frame with four screw
holes, push the cushion against frame, and ensure
front of cushion is parallel to the front of the frame.
A
S P O K E B A C K C H A I R • A S S E M B LY I N S T R U C T I O N S
B Cushion 1/PC
Option 2: Place seat (B) upside down on a flat surface,
preferably a table. Align chair frame (A) on top of cushion
(B). Center cushion with four screw holes on frame, push
cushion against the back of the frame, and ensure front of
cushion is parallel to the front of the frame.
O R
B

HARDWARE:

C Screws 4/PC
B
W W W . L A N C A S T E R TA B L E A N D S E A T I N G . C O M
A