Getting Started; Power; Clock Backup; Using Ac Power - Coby CDRA147 - Digital AM/FM Dual Alarm Clock Radio/CD Player Instruction Manual

Getting Started

Power

Clock Backup

Open the BATTERY COMPARTMENT [20] and connect one
9-volt battery (not included) to the appropriate terminals.
This backup battery will allow your clock to maintain the
correct time during a power outage or other interruption
of the AC connection.
If the AC connection is interrupted, the clock will
continue to mark the correct time internally. The
time will not be displayed until AC power is recon-
nected.
An alkaline type battery is recommended. For
optimum performance, this battery should be re-
placed every six months.

Using AC Power

Make sure that the voltage of your electrical power supply
corresponds to the voltage indicated by the manufacturer. If
the voltage is incorrect, consult your dealer or service center.
This unit should be used with AC 120V / 60 Hz wall
outlets, only.
Connect the electrical cord by plugging it into the wall
outlet. Keep objects clear of the cord where it connects to
the device and to the wall. Do not stretch the cord.
Page 6 Coby Electronics Corporation