To prevent electric shock, match wide blade of plug to wide slot of outlet and fully insert. For recycling or disposal information about this product, please contact your local authorities or the Electronics Industries Alliance: www.eiae.org. Page PRECAUTIONS CR-A119 Coby Electronics Corporation...
IMPORTANT SAFETY INSTRUCTIONS Read Instructions: All the safety and operating instructions should be read before the product is operated. Retain Instructions: The safety and operating instructions should be re- tained for future reference. Heed Warnings: All warnings on the product and in the operating instruc- tions should be adhered to.
Page 4
IMPORTANT SAFETY INSTRUCTIONS Power-Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and at the point which they exit from the product. Protective Attachment Plug: The product may be equipped with an at- tachment plug with overload protection.
Page 5
IMPORTANT SAFETY INSTRUCTIONS Overloading: Do not overload wall outlets, extension cords, or integral con- venience receptacles as this can result in a risk of fire or electric shock. Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or shout-out parts that could result in a fire or electric shock.
PRECAUTIONS ... 2 IMPORTANT SAFETY INSTRUCTIONS ... 3 TABLE OF CONTENTS ... 6 FEATURES ... 7 GETTING STARTED ... 8 CR-A119 at a Glance ... 8 Top View... 8 Left View ... 8 Right View ... 8 Display ... 9 Power Connection ...
Thank you for purchasing a COBY CR-A119. Please read through this manual carefully in order to have a better understanding of the perfor- mance and features of your alarm clock radio. Top panel functions as a touch-sensitive snooze sensor ...
GETTING STARTED CR-A119 at a Glance Top View Snooze Sensor Left View Sleep Alarm Set Time Set Minutes Hour Alarm Off Mode Switch (On, Off, Auto) Band Switch (FM, AM) Right View Dimmer Switch (High, Low) Radio Frequency Band Radio Tuning Indicator...
GETTING STARTED Display Hour Minutes Hour/Minutes Indicator (H, M) Auto Indicator Power Connection AC Power This unit runs on AC 120V power. Plug the AC Power Cord into a 120V household electrical wall outlet. Do not connect the power plug to a power outlet oth- er than that which is indicated here or on the label as this may result in the risk of fire or electric shock. Do not handle the power plug with wet hands.
CLOCK/ALARM MODE Setting the Clock Time To change the clock hour: Press and hold the TIME SET button. While holding the TIME SET button, press the HOUR button. The PM indicator on the display will light for “PM” hours. ...
CLOCK/ALARM MODE Setting the Alarm Mode You can set the alarm to wake to the radio or to a buzzer. To wake to a buzzer, turn the VOLUME dial all the way down until it clicks into the “Buzzer” position. To wake to radio, select a radio station and then turn the VOLUME ...
Basic Operation Set the MODE switch to the “On” position to turn the radio on. (To turn the radio off, set the MODE switch to the “Off” position.) Set the BAND switch to: AM: Listen to AM broadcasts. FM: Listen to FM broadcasts. ...
TROUBLESHOOTING If you have a problem with this device, please read the troubleshooting guide below and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. COBY Electronics Technical Support Address: 56-65 Rust St.
Power Supply Tuning System Audio Output Audio Input Output Power Speaker Impedance Operating Conditions Specifications and manual are subject to change without notice. Page 1 SPECIFICATIONS AC 120V 60Hz AM: 530 - 1710kHz FM: 88 - 108MHz Integrated Speaker (x1) 3.5mm Aux Line-In 300mW 8Ω...