Getting Started; Ac Power; Battery Backup - Coby CSMP120 Instruction Manual

Getting Started

Â

AC Power

This unit is powered by an AC adapter.
Connect one end of the included AC adapter to an
AC 120V / 60Hz mains outlet. Connect the other end
to the Power In (DC 9V) jack located on the rear of
the unit.
Do not connect the power adapter to a
power outlet other than that which is indi-
cated here or on the label as this may result
in the risk of fire or electric shock.
Do not handle the power plug with wet
hands. Doing so may cause electric shock.

Battery Backup

The battery backup function maintains the clock
time should the power be interrupted. When power
is restored, the correct time will be displayed.
Page 7
The battery compartment is located on the rear of
the unit. Install one 9V "006P" battery (not included)
in the battery compartment.
Make sure that the positive (+) and negative (-)
battery terminals match the markings in the battery
compartment.
The battery backup feature will not power the
radio nor any other functions. It is designed to
maintain the clock time only.
The battery used in this device may present
a fire or chemical burn if mistreated. Do not
disassemble, incinerate, or heat the battery.
Risk of explosion if battery is replaced by an
incorrect type. Contact the manufacturer
before replacing the battery.
If the unit will not be used for a long time,
remove the battery to prevent damage or
injury from possible leakage.
Getting Started